QT-1030 gradient meteorological monitoring system is a high-precision meteorological monitoring system designed for the vertical spatial distribution measurement of various elements, which can directly measure the average characteristics of the atmosphere and turbulence characteristics. Observe and study the boundary layer energy, radiation, various material exchanges, damping and disturbances of different underlying surfaces. The high-precision sensor approved by the World Meteorological Organization has a modular structure, which is simple to set up, easy to install and operate, and easy to maintain. It has been strictly tested before leaving the factory, safe and reliable, and stable in operation, and can be left unattended in the wild for a long time.
QT-1030 Gradient Meteorological Monitoring System
The picture is for reference only, the actual order shall prevail.
Technical Parameters:
Data collector
Technical Parameters
CR1000
13-bit analog / digital conversion
Analog channels: 8 differential channels (16 single-ended channels)
Pulse channel: 2 pulse channels can record high level (5V square wave), switching value or low level AC signal
Control output: 8 multifunctional digital control ports
Internal temperature compensation, real-time clock
Working temperature: -25 ~ 50 ℃; -55 ~ 85 ℃ (extended)
Data stored in tabular form with time stamps and record labels
When the collector is powered off from the main power supply, the battery supports SRAM memory and clock to ensure that information such as data, programs and accurate time will not be lost
Temperature and humidity sensor
Technical Parameters
SKH 2060
Humidity measurement range: 0 ~ 100%,
Humidity measurement accuracy: less than 2%,
Temperature measurement range: -40 ~ 60 ℃,
Temperature measurement accuracy: ± 0.2 ℃,
Sensor size: diameter: 31mm, height: 152mm
Wind speed sensor
Technical Parameters
AN1
Measuring range: 0.2 ~ 75m / s
Measurement accuracy: 1% ± 0.1m / S
Output range: 0.2 ~ 60Hz
Sensitivity: 0.8Hz per m / s
Working temperature: -30 ~ + 50 ℃
Cable length: 3 meters, 5 meters, 10 meters (customized)
Wind direction sensor
Technical Parameters
WD1
Measuring range: 0 ~ 358 degrees
Measurement accuracy: 0.3 degrees (± 2 degrees at wind speed> 5m / s)
Starting wind speed: 0.6m / s (action when the angle between the wind vane and the wind direction is greater than 45 degrees)
Resolution: ± 0.2 degrees
Working temperature: -50 ~ + 70 ℃
Rain sensor
Technical Parameters
TR-525M
Sensor type: magnetic reed switch
Output signal: switch signal
Measurement accuracy: 1.0% up to 2 "/ hr (50 mm / hr)
Size: 24.5cm diameter x 29.21cm high
Surface area: 214cm2
Working temperature: 0 ~ 50 ℃
Cable length: 12 meters
Total radiation sensor
Technical Parameters
SKS 1110
Measuring range: 0-5000Wm-2
Wavelength range: 400 ~ 1100nm
Measurement accuracy: typical: <3%, maximum: 5%
Sensitivity: 1mV / 100Wm-2
Working environment: -35 to + 70 ° C, 0-100%
Size: diameter: 34mm, height: 38mm
Material: polyoxymethylene resin, sealing grade up to: IP68
Soil moisture sensor
Technical Parameters
ML2x / w-05
Measuring range: 0 ~ 100% Vol
measurement accuracy:
± 1% (after professional calibration; 0 ~ 40 ℃)
± 2% (after professional calibration; 40 ~ 70 ℃)
± 5% (0 ~ 70 ° C; default soil type of the instrument)
Working temperature: -10 ~ 70 ℃
Soil temperature sensor
Technical Parameters
ST-100
Measuring range: -50 to 70 ° C
Measurement accuracy: ± 0.1 ℃
Cable length: 5 meters
Probe size: 7mm × 0.6mm
Origin: United States