MOQ | 1 set |
Port | Shenzhen or Guangzhou |
Packaging | Individually packed by wooden case |
Lead Time | 10-30 days |
It is intended to determine the melt flow rate of various thermoplastics and resins extruded from a die with a specified length and bore diameter
ASTM D1238 Melt Flow Rate of thermoplastics by extrusion plastometer.
ISO1133 Plastics determination of the melt mass flow rate (MFR) and melt volume flow rate (MVR) of thermoplastics.
GB3682-2000 Determination of the melt mass-flow rate (MFR)and the melt volume-flow rate(MVR)of thermoplastics.
JIS-K7210 Plastics.Determination of the melt mass-flow rate (MFR) and melt volume-flow rate (MVR) of thermoplastics.Part 1: Standard method
Essential Parameters
Model |
AT-P6003 |
Testing method |
MFR, MVR |
Temperature control |
RT-300℃, RT-400℃ (optional), RT-500℃(optional) Temperature fluctuation: ±0.5℃ Temperature uniformity: ±1℃ Temperature display resolution: 0.1℃ Temperature recovery time: less than 4 minutes |
Standard die |
Φ2.095±0.005mm Length: 8.000mm±0.025mm |
Cylinder |
Internal diameter: 9.550mm±0.025mm Length: 152mm± 0.1mm Material: Wear resistance and corrosion resistance Hardness not less than 500(HV5~HV100) |
Piston |
Head length: 6.350mm±0.100mm Diameter of head: 9.474mm±0.007mm |
Weight precision |
±0.5% |
Test results |
Automatic calculate results and print out |
Material cutting method |
Manual and automatic integration |
Position detection |
Loop distance from up and down: 30mm Control precision: ± 0.1mm |
Test flow control |
Times of cutting of material: 0~10 |
Material cutting interval |
0~999S |
Time display resolution |
0.1S |
Control flow reaches the set temperature without volatility |
Barrel temperature time: 15min Material be installed: 1min Material sample temperature recovery time: 4min When binder set: 1min |
Testing Load |
8 grade in total, (8 sets weights) |
Power supply |
AC220V±10% 50Hz/60Hz or specify |
Accessories |
1. Main Machine 1 set (built-in mini- printer) 2. Weight (8 sets): 0.325kg, 1.200kg, 2.160kg, 3.800kg, 5.000kg, 10.000kg, 12.000kg, 21.6kg (in the 1st load) 3. Weights tray 1pc (in the 1st load) 4. Piston rod: 1pc (in the 1st load) 5. Standard die: tungsten carbide 6. Material Charging hopper: 1pc (Stainless Steel) 7. Material Charging rod: 1pc 8. Cylinder cleaning rod: 1pc 9. Standard Die cleaning bar 1pc (Stainless Steel) 10. Cleaning Gauze: 2 Rolls 11. Print paper: 2 Rolls |