40kg simulated pressurized coke oven

Packaging

Fine wooden case

Product Details

● 40kg simulated pressurized coke oven product introduction

Our company's exclusive patent product 40kg simulated pressurized coke oven, also known as "load test coke oven", is a traditional test coke oven. It has the characteristics of tight sealing, more uniform three-stage heating, and can simulate pressurization, which is consistent with the CSR value actually produced by large coke oven industries. Can be used to guide coal blending.

Divided into single-station, double-station, 40kg, 100kg and other design styles, among which the double-station type can realize continuous detection, which has the advantages of saving experiment time and power consumption.

● Technical features of 40kg simulated pressurized coke oven

1. The long-life coal steamer independently developed and produced by our company has a wall thickness of 10mm and a service life of more than 6 years for several months of normal use; while similar products have a wall thickness of 5-6mm and a service life of only 2 months, resulting in follow-up The cost of use is high. The structure of our company's coal turbine adopts a seamless pipe integral molding structure; while most of the coal ships of similar products are welded on the coiled rear side, the welding port is easy to open and the later stage of welding will cause the experimental tar to overflow and adhere to the Burn the stove with wires on the stove. The furnace can be used normally for 2 years, so the furnace needs to be replaced every 2 months, which adds additional cost of use.

2. Equipped with exhaust gas environmental protection purification device independently developed by our company. High-efficiency combustion adopts chamber and post-water film injection to realize pollution-free discharge. Even with sudden power outages.

3. Three-phase balanced power supply is adopted, and the grid balance is used to precisely control the temperature of the middle and lower sections while ensuring a good correlation between the furnace wall coking results and coke oven production. And can be replaced separately to reduce the cost.

● 40kg simulated pressurized coke oven technical parameters

Coke oven body	It consists of base, frame, high temperature retort furnace, lifting and unloading mechanism, flue gas, purification system, compaction system, control system and other series of devices
Furnace body	Furnace size	φ 460*700 (mm)	Heating element	HRE spiral heating body
	heating method	Three Independent Temperature Controls	electric heating structure	Spiral inlaid zirconium fiber heating jacket
	heating power	6KWx3 sections	Operating temperature	≤1150°C
	temperature control method	Computer setting, Siemens PLC program control
Lifting and unloading mechanism	Function	Sample Steamer and Loader Assembly	Hoisting method		Lead screw + guide column electric mode
	lifting height	800mm _	drive mode		screw drive
tamper	Function	Coal cake density quantitative compaction	Density adjustment range		0.7-1.05 g / cm3
	Anti-tamp base	When the briquetting is tamped, ensure that the coalification container is placed stably	Tamping Control		Pneumatic lifting, pneumatic hammer compaction
main control system	Control System	Computer + Siemens PLC (200-smart)	data processing		Computer remote control, real-time display of temperature control curve, output data report.