The Z-type water surface evaporation station is an instrument used to observe the regularity of water surface evaporation in different time periods. Manufactured in accordance with the requirements of the Standard No. SD265-88 of the Ministry of Water Resources of the People's Republic of China for the Standard for Observation of Water Surface Evaporation. It can be used directly with a Φ618 mm evaporation bucket or a 20 m2 standard evaporation pond to monitor the water evaporation. Its measurement accuracy and stability are far superior to ultrasonic and other types of water surface evaporation sensors, suitable for different regions and various environmental conditions.
Digital evaporation station
System Features:
Digital sensor has no temperature drift, time drift, and long-term stable performance
High resolution and precision
Can be observed normally under wind, wave and rainfall climate conditions without losing accuracy
Anti-electromagnetic interference, the output data is correct even after power is cut off
Can be used with automatic water adding device and collection and recording device to realize automatic monitoring of evaporation process
Support for external large-capacity memory cards
Support GPRS data wireless transmission
Support solar power supply mode for unattended operation
Optional other weather sensors
Network management software (optional):
Channel Technology-Ecological Monitoring Solution Expert Channel Technology-Ecological Monitoring Solution Expert
a) Management function: It has functions of hierarchical management of data and management of monitoring points.
b) Collection function: collect the soil moisture monitoring data at the monitoring point.
c) Alarm function: data alarm function.
d) Query function: The monitoring system software can query various historical records.
e) Storage function: The front-end monitoring equipment has a large capacity data storage function; the monitoring center database can record all historical data.
f) Analysis function: The data can generate curves and reports for trend analysis.
Technical Parameters
CR300
Data collector
Technical Parameters
image
CPU
ARM Cortex M4 operating frequency: 144MHz
Channel Technology-Ecological Monitoring Solution Expert Channel Technology-Ecological Monitoring Solution Expert
storage
30M Flash data storage space,
5M Flash CPU driver space
2M Flash operating system space
Clock accuracy
± 1 minute / month
Data communication port
1 USB Micro
RS232 port
Sensors that can be connected to a modem or RS232 interface
Number of analog ports
6 single-ended (3 differential)
Signal input range
Voltage: -100 ~ 2500mV and ± 34mV adjustable,
Current: 4 ~ 20mA or 0 ~ 20mA (SE1, SE2 channels only)
A / D conversion digits
24-bit analog / digital conversion
Analog measurement accuracy
± (0.1% of reading + 3μV), 0 ~ 40 ℃
Analog measurement resolution
23 nV (± 34mV range, differential measurement)
Digital port
2, support switch signal, pulse signal, AC sine wave signal
Control port
2, support SDI12, RS232, switch signal, pulse signal acquisition
Support 5V output
Stimulus port
2, 5V voltage excitation for bridge resistance measurement or sensor power supply.
Sensor powered
1 12V controllable voltage source (max. 500mA)
size:
14.0 x 7.6 x 5.1 cm
Operating temperature
-40 ~ 70 ℃
255-100 evaporation
sensor
Technical Parameters
image
Measuring range
0 ~ 10 inches
Channel Technology-Ecological Monitoring Solution Expert Channel Technology-Ecological Monitoring Solution Expert
measurement accuracy
0.25%
Linearity
0.25%
impedance
1000 ohms
Operating temperature
-40 ~ 60 ℃
Float diameter
4 inches
height
27.5 inches
diameter
8 inches
Base
16-inch triangular chassis with level
water intake
0.5 inch NP connector, female
cable
3-pin connector, 50 feet
weight
7.5 pounds
255-200 evaporation
Dish
Technical Parameters
image
Texture
stainless steel
No
size
Diameter: 1026mm * Height: 254mm
Other weather sensors can be added as needed!
Origin: United States