Lightweight Plastering Gypsum

Product Details

This product is a high-performance wall leveling material made of gypsum as the main raw material, adapted to hydrophobic lightweight aggregate and imported additives and other raw materials, which has passed the China Ten Ring Certification and the French A+ indoor certification, and is a green and environmentally friendly product.

--Packing specification: 20KG

--Executive standard: GB/T28627-2012 "Plastering Gypsum"

--Product advantages: sound insulation, heat preservation, heat insulation, more energy-saving, more environmentally friendly;

Product Information

Product features: 1. The product has high strength, the national standard adhesive strength requires 0.30MPa, and this product can reach 0.46MPa.

2. It has certain sound insulation, heat preservation and heat insulation performance, which is more energy-saving and environmentally friendly;

3. Replace the traditional cement facing plastering, hand plastering/machine spraying can be, the construction is simple, flexible and efficient;

4. Good construction performance, good workability, easier construction;

5. Early strength, fast hardness, no hollowing, no cracking;

Main ingredients: construction gypsum, hydrophobic lightweight aggregates and additives.

Scope of application: It is used for plastering and leveling the interior wall of the building in the indoor dry area, especially for the wall with a large flatness error.

Theoretical dosage: 7~7.5kg/㎡ (10mm thickness calculation) The specific dosage varies depending on the surface flatness of the wall and the construction method.

Base treatment: The base layer should be solid, no floating ash, no dirt;

Slurry preparation: first pour clean water into the mixing barrel, add plastering gypsum while stirring, stir until there is no agglomeration, then let stand for 2min, and then stir for 30 seconds before use.

Batch scraping leveling: each batch scraping of this product should not be less than 5mm, the highest is not more than 20mm, a stirred slurry should be scraped within the batch scraping time, the initial setting of the slurry is not allowed to add water to stir the use.

Executive standard: Technical standard: GB/T 28627-2012 "Plastering gypsum".

Environmental Protection Standard: GB 18582-2020

Construction temperature: The construction environment temperature should be between 5°C~35°C.

Storage and transportation: Store in a cool, dry place to protect from moisture. The product has a shelf life of 6 months. The product is safe and non-combustible, and the storage and transportation can be handled as non-dangerous goods.