Packaging | OEM | Port | China |
Lead Time | 10-12 Days |
This product is a high-quality polymer modified dry mortar, and its adhesive performance is far superior to that of traditional cement adhesive materials. It has passed the China Ten Ring Certification and the French A+ indoor certification, and is a green and environmentally friendly product.
--Packing specification: 20KG
--Executive standard: GB/T 25181-2019 (indoor type I)
--Product advantages: strong adhesion, not easy to hollow, thin adhesive layer, light weight, low dosage.
Product Information
Product features: 1. The product has high strength, the national standard strength requires 0.50MPa, and the product can reach 0.6-0.9MPa.
2. Stable quality and good anti-seepage performance;
3. Just add water, simple and easy to use;
4. Strong adhesion, fast hardening speed, not easy to hollow drum;
5. The paste layer is thin, the weight is light, and the dosage is small.
Main ingredients: Portland cement, refined sand, imported rubber powder and functional additives.
Scope of application: It is suitable for pasting indoor ceramic bricks with a water absorption rate of ≥ 10% and a specification of ≤ 400mm*800mm.
Theoretical dosage: 5~6kg/㎡;
Base requirements: 1. The base layer should be solid and firm, not hollow, and the tensile strength should not be less than 0.5MPa;
2. The flatness error is less than 3mm (2 meters to check by ruler).
Glue preparation: 1. Pour the powder into the water and stir it into a paste, pay attention to the water first and then the powder;
2. The mixing ratio is: powder: water is 1:0.2-0.25 (the proportion of water is suitable for the best construction)
3. Stir evenly, fully mix the gouache, and there is no starch dough at all; after stirring, it must stand for 10 minutes, and then stir evenly again before use.
4. The stirred glue must be used up within 2 hours.
Tile pasting: 1. Clean up the dust and release agent on the back of the tile;
2.Paint the back of the tile with this product, leave it above 25 °C for 3-4 hours, and extend the drying time below 25 °C;
3.Use a tooth scraper to extend the base layer and the back of the tile in the same direction as the thin scraping tile adhesive for double-sided gluing, and then
Cnead the tiles against the wall.
4.The tiles can be adjusted arbitrarily within 10 minutes, and the recommended construction thickness is 8-12mm.
Executive standard: Technical standard: JC/T547-2017 "Ceramic Tile Adhesive" C1
Environmental protection standard: GB 18583-2008 "Limit of Harmful Substances in Adhesives for Interior Decoration Materials"
Construction temperature: The construction environment temperature should be between 5°C~35°C.
Storage and transportation: Avoid direct sunlight, should be placed on the pallet and stored off the ground to prevent rainwater from soaking and avoid excessive stacking. The product has a shelf life of 12 months. Failure to follow the above storage methods may result in premature product failure or agglomeration.
Neiguanzhuang Village,and Qianyangzhuang Village in Linxi Town,Yutian County,Tangshan City,Heibei Province,China