Automatic Bituminous Coal Colloidal Index Measuring Instrument

Packaging

Fine wooden case

Product Details

● Automatic bituminous coal product introduction colloid index measuring instrument

Our company's automatic bituminous coal colloidal layer index tester has a computer software copyright registration certificate. It is a special instrument to measure the index of the bituminous coal gel layer, including the thickness Y of the maximum gel layer, the final shrinkage rate X and the volume curve. Meet the technical requirements and indicators of GB/T479-2016 "Determination of plasticity index of bituminous coal"

The control system is controlled by an industrial computer and uses a high-speed data acquisition module to collect data. High control precision. The thickness of this colloidal layer is automatically detected by the manipulator, which has good stability and accurate records and calculations. The error is caused by the uniform and artificial drawing of the colloidal layer curve. ● Automatic asphalt technical characteristics coal colloid index measuring instrument

1. The measuring instrument of the automatic bituminous coal colloid indexing measuring instrument is required by the national standard of Φ1mm; the probe of other similar products is 1.5-2.0 mm.

Arabic numerals. Automatic Probe Bituminous Colloid Index Measuring Instrument Measuring instrument completes the measurement work from the starting position to the bottom within 2 seconds of the coal cup for measuring Z-shaped coal; the completion time of this other similar products is more than 20 seconds.

3. The automatic bituminous coal colloid index measuring instrument can accurately detect fast-changing Z-shaped coal, and super-fat coal with Y value greater than 45mm, and can also accurately detect coal with thinner colloid.

4. The automatic bituminous coal colloid index measuring instrument has intelligent image recognition and positioning functions, and the φ 1mm probe is automatically aligned with the φ 3mm paper tube cup in the coal.

● Fully automatic measurement instrument for bituminous coal colloid index technical parameters

control time	0-190 minutes	Temperature Control Accuracy	Between 250-730°C, This temperature difference is <±0.5°C
Control range	0-730°C, resolution 0.5°C	Displacement X value measuring range	0-100 mm , precision 0.3 mm
Voltage	AC 220V ± 10% 50Hz	Colloid Y value measurement range	5-70 mm , precision 0.1 mm
load power	≤8KW	environmental requirements	Temperature 15-40 °C , humidity ≤80%, No strong magnetic field, no corrosion