MOQ | 1 set |
Port | shanghai |
Packaging | wooden box |
Lead Time | 30days |
color | as request |
Carborundum is very hard to pulverize for its high hardness, but
the use is very extensive. Carborundum is mainly used for the
production of compact and lightweight construction materials
processed. Carborundum has four major application areas, such as:
functional ceramics, refractory, abrasive and metallurgical raw
materials.
(1) As an abrasive, can be used for abrasive grinding wheel,
Whetstone, grinding, sand tile class.
(2) As metallurgical deoxidizer and high temperature
materials.
(3) As high-purity single crystal can be used for manufacturing a
semiconductor, the manufacture of silicon carbide
fibers.
Clirik Carborundum Vertical mill also named as silicon carbide
Vertical mill, is a professional grinding machine for Carborundum
pulverizing.
Application of Clirik Carborundum Vertical mill:
Carborundum Vertical mill is the new type grinding equipment
specializing in producing fine and superfine powder of
non-inflammable, non-explosive and brittle materials with Mohs’
hardness under six, such as calcite, chalk, limestone, dolomite,
kaolin, bentonite, talc, mica, magnesite, illite, pyrophyllite
and vermiculite, sepiolite, attapulgite, rectorite, diatomite,
barite, gypsum, alunite, graphite, fluorite, rock phosphate,
kalium ore, pumice, etc., totally more than 100 kinds of
materials.
Structure of Carborundum Vertical mill:
Carborundum Vertical mill mainly consists of main unit,
classifier, powder collector, dust cleaner, blower, muffler,
sound-proof room, crusher, bucket elevator, storage hopper, and
vibrating feeder.
Working principle of Carborundum Vertical mill:
After crushed by hammer crusher, the large materials become small
ones and are sent to storage hopper by elevator, edge of then
evenly sent to the upper distribution plate of the turnplate by
vibrating feeder and sloping feeding pipe. When the Vertical mill
is at work, all the grinding rollers are rolling in the ring, and
the materials are driven to the edge of the turnplate by the
centrifugal force and fall down into the grinding chambers where
the materials are repeatedly pressed, crushed and grinded by the
rollers. The high-pressure air blower constantly inhales air
within the Vertical mill and, in turn, the air flow with crushed
materials are brought to the classifier whose high-speed impeller
will screen the airflow: the unqualified particle size will fall
and return to the mill for being reground while the qualified
particle size mixed with air will go into the cyclone powder
collector. Most of the qualified powders will fall an exit from
the discharging valve at the bottom; a small proportion of the
fine powders, with airflow, moves to the dust cleaner, and clings
to the surface of the filter bags. At the same time, the fine
powders clinging to the surface fall down by the sudden vibration
of the filter bags, which is caused by the instantly ejected
high-pressure gas controlled by the pulse valve. The materials
from the above two lots are sent by the conveyor at the bottom to
get finished powders packed. In addition, filtered clean air will
be emitted from the air outlet of muffler in the
end.
Features of Carborundum Vertical mill:
1. High efficiency
Under the same finished final size and the same motor power, the
capacity of micro powder Vertical mill is twice as much as jet
mill, mixing grinder and ball mill.
2. Long life cycle of spare parts
The ring and roller are forged by special material with high
utilization. Under the same grinding material and finish special
size, the lifecycle of spare parts is about one year, which is
2-3times longer than impact mill or turbo mill. Furthermore, the
lifetime can reach 2-5 years for grinding calcite
carbonate.
3. High safety and reliability
As no rolling bearings or screws in grinding cavity, there are no
problems caused by bolts shedding or rapid wear of bearings and
seal components.
4. High fineness and flexible adjustment
The final fineness of the grinding materials can be adjusted
between 325 meshes and 3000 meshes, and the product fineness can
reach D97≦5um.
5. Environment-friendly
The application of pulse deduster and muffler greatly alleviates
dust pollution and noise.
Model and technical data of Carborundum Vertical mill:
Model | HGM80 | HGM90 | HGM100 | HGM100A | HGM125 |
Ring Diameter(mm) | 800 | 900 | 1000 | 1000 | 1250 |
Ring Number/pcs | 3 | 3-4 | 3-4 | 4 | 4 |
Roller Number/pcs | 21 | 24-32 | 27-36 | 27-36 | 40-44 |
Main Shaft Speed/r. p. min | 230-240 | 200-220 | 180-200 | 180-200 | 135-155 |
Input Size/mm | ≦15 | ||||
Finished Size/um | 5-47(325-3000) | ||||
Capacity t/h | 0.4-4.5 | 0.4-5.5 | 0.4-6.5 | 0.4-7.5 | 0.7-10 |
Outlet Size L*W*H/m | 13.9*4*6.2 | 14.7*4.8*7.2 | 18*4.6*8.6 | 18*4.6*8.6 | 14*9*10.25 |
Note: This specification is just referencing, any changes are subject to the products.
Should you have any questions, please do not hesitate to contact
me.
Phone:+8618001642498
wechat:15993021269
qq:2937596967
http://www.raymond-mill.com/ http://www.stone-mills.com http://www.grinding-plant.net
http://www.grinding-mill.in http://www.powder-grinder.com/ http://www.mill-grinding.com
http://www.mill-machine.net http://www.ultra-mill.com http://www.vertical-mill.net
https://www.saico.net