Product Details
Shanghai Clirik
Machinery Co., Ltd. is specializing in processing plant
for fine super fine powder of non-inflammable, non-explosive and
brittle amterials with Moh's hardness under six, the moisture
under 5% such as calcite. chalk, limestone, dolomite, kaolin,
bentonite, talc, mica. magnesite, illite, pyrophyllite and
vermiculite sepiolite, attapulgite, rectorite, diatomite, barite,
gypsum, alunite, graphite, fluorite, rock phosphate, Kalium ore,
pumice, etc., totally more than 100 kinds of materials.
HGM series processing plant maily consist of main unit,
classifier, powder collector, dust cleaner, induced draft fan,
muffler, sound-proof room, crushe, crucket elevator, storage
hopper, and vibrating feeder.
Working Principle of
HGM series powder processing plant:
1) After crushed by hammer crusher, the large materials become
smaller pieces and are sent to the micro powder grinding
mill.
2) When the micro powder grinding mill is at work, the granulated
materials are crushed and grinded by the rollers into particles
below 47micron.
3) The high-pressure air blower constantly inhales air within the
micro powder grinding mill.
4) Along with the high speed airflow, micronized materials are
brought to the classifier.
5) The qualified particles are screened and driven into the
cyclone powder collector, finally exit from the discharging valve
at the bottom;
6) A small proportion of the fine powders, with airflow, moving
to the dust cleaner. Filtered clean air will be emitted from the
air outlet of muffler in the end.
Technical data of HGM
series powder processing plant:
Model
|
HGM80
|
HGM90
|
HGM100
|
HGM100A
|
HGM125
|
Ring Diameter(mm)
|
800
|
930
|
1035
|
1035
|
1300
|
Ring Number (PCS)
|
3
|
3-4
|
3
|
4
|
4
|
Roller Number(PCS)
|
21
|
24-32
|
27
|
34-36
|
40-44
|
Main Shaft Speed (r. p. min)
|
230-240
|
200-220
|
180-200
|
180-200
|
135-155
|
Input Size (mm)
|
≤20
|
Finished Size (um)
|
5-47(325-2500)
|
Capacity (t/h)
|
0.5-4.5
|
0.6-6.5
|
0.7-7
|
1-8.5
|
1.5-12
|
Outlet Size L*W*H (m)
|
13.9*4*6.2
|
14.7*4.8*7.2
|
18*4.6*8.6
|
18*4.6*8.6
|
14*9*10.25
|
Motor powder (KW)
|
145-165
|
185-204
|
263
|
263-290
|
380-430
|
Note: This specification is just referencing, any changes are
subject to the products.