Port | Shanghai |
Packaging | 25 kg/bucket (spraying paint) or 30 kg/bucket (screeding paint),0.9 ton/tray |
Lead Time | 15 days |
Density(g/cm3) | 2.0 | Cure time (min) | 35 |
Abrasion Performance / mg (200r/1000g reduce weight) | 21 | Glass beads content(%) | 20 |
Advantage:
* Material from Evonik Industries;
* Wear resistance is 2 times better than thermoplastic marking;
* Stain resistance,anti-oil,anti-water;
* Excellent aging resistance;
* Environment protection,100% solid content and no volatile substances.
Construction mode includes spraying application and screed application and extruded application.
Principle of MMA concrete pavement marking paint high adhesion
Consumption (Actual consumption depends on the thickness of marking & Roughness of pavement & Local temperature environment )
surface temperature 25℃ |
throwing application |
round dot application |
rib like application |
thickness |
4mm |
5mm |
6mm |
Consumption |
3.2kg/㎡ |
3.5kg/㎡ |
4.5kg/㎡ |
Hardner |
50g/㎡ |
50g/㎡ |
65g/㎡ |
primer |
150g/㎡ |
150g/㎡ |
150g/㎡ |
Glass beads |
0.6kg/㎡ |
0.6kg/㎡ |
0.6kg/㎡ |
Technical Data:
·Retroreflection valve:≥350mcd(white)
·Curing time:≤20minutes
·Density (g/cm³):2
·Anti wearing valve:≤35
·Adhesion:≤2
·The intact rate of the pavement marking (in the concrete pavement):≥95%
Color:White/Yellow/Customize other colors
Typical installation areas:
·Airport;
·Port;
·Wharf pavement and highway;
·National highway and other concrete road.
Thermoplastic pavement marking |
MMA concrete pavement marking |
Room 8819, Floor 8, Gaoke Bldg., No. 32, High-Tech Street, Taiyuan Xuefu Park, Comprehensive Demonstration Area Shanxi Province,China