MMA Two-Component Colorful anti-skid Pavement Marking material (MMA Cold Plastic)

Product Details

Advantage:

* Good visuality and colorful;

* Good anti-skid and can improve the pavement anti-skid in the rainy day;

* No VOC,environmental protection,energy conservation

* Compressive strength,anti-wear,good adhesion;

* Excellent aging resistance ,cold resistance;

* Weather resistance,anti-oil,anti-acid,anti-alkali.

This materials has four construction modes.

First （Three layers -- covering antiskid layer）

During construction：

Step 1. Worker use scraper with toothed to coat primer;

Step 2. At the same time to strew the anti-skid aggregates above the coating primer;

Step 3. After the primer drying,sweeping the redundant anti-skid aggregates on the primer

and use the paint or resin as the top coat.

Consumption （Actual consumption depends on the roughness of Pavement ）

The thickness of colorful anti-skid road marking is 3mm

Second (Two layers)

During construction:

Step 1. Worker use the scraper with the toothed to coat primer;

Step 2. At the same time to strew the anti-skid aggregates above the coating primer;

Step 3. After the primer drying,sweeping the redundant anti-skid aggregates on the primer.

Consumption （Actual consumption depends on the roughness of Pavement ）

The thickness of colorful anti-skid road marking is 3mm

Third（single layer--Can add the sand）spraying application

During construction,using the worker or with the air assisted spraying equipment to overlay the road.

Fourth (Hybrid)

During construction:

Step 1.Mix the paint & aggregate and the mixture evenly;

Step 2.Then worker use the scraper to screed evenly;

Step 3.Finally using roller to evenly brush the surface of marking.

Technical Data:

·Curing time:≤60 minutes

·Anti wearing valve:≤10mg

·Anti slide swing valve:≥65BPN

·Flexibility:≤1

·Crack resistance in low temperature:In -40℃ no crack after three cycles

Color:Various colors / Customize color