MARUKIN-JIRUSHI Temporary Frame Hammer [Mirror] Snak Bent Shape {Rising Dragon} 350mm

Product Details

• Product size:

Length (H) 350mm

Width (W) 28~43mm

Depth (D) 20~23mm

Overall length 355mm

Head diameter 26mm

Head length 130mm

Weight (G) 430g

• Color:

Mirror

• Product Description:

This is an original temporary frame hammer with a mirror (chrome plated) head and an engraved and baked pattern of a rising dragon picture.

It is a product that looks good even when displayed, while maintaining the conventional ease of handling and gripping.

• Product Specifications

Temporary frame hammer handle, dragon picture, engraved and baked finish, head, mirror (chrome plated), with stop, small handle, oak, temporary frame hammer handle, snake curved, 350M/M "Ascending Dragon."

• Material:

Head: Carbon steel

Handle: Natural wood, Oak

• Country of origin: Japan

The products are handmade and there may be slight differences in size, etc.

Wooden patterns are made of natural wood, so there are individual differences in grain, color, etc. There is also a possibility that the color may change without notice.

Please note that the color may change without notice.

The grain and color of the wood pattern cannot be specified.

The actual color of the product may appear different depending on the monitor environment used.

Please note that product specifications, packaging, etc. are subject to change without notice.

• Please read the following precautions.

※Precautions

*This product has manufacturing marks, stains, etc.

*The head may become loose after repeated use. In that case, please re-hit the wedge of the head.

In such a case, please use it after confirming that there are no cracks or looseness by re-driving the wedge of the head.

Even if the wood handle has not been used for a long period of time, the head may become loose or the wedge may lift up due to drying or shrinkage of the wood handle.

Even if the wood handle has not been used for a long period of time, the head may become loose or the wedge may lift up. In such a case, please re-strike the wedge to make sure there are no cracks or looseness before use.

Please use it after confirming that there are no cracks or looseness.

The cationic coating will gradually peel off during use.

*Please do not allow the product to get wet. Do not allow it to get wet, as it may cause deterioration, mold, rot, etc.

When wet, wipe well with a dry towel and let dry.

Do not use the product for any purpose other than its original purpose.

For safety, be sure to wear a helmet and safety glasses.

Please work after confirming the safety of people around you.

Do not use the tool if the head or handle is cracked or rattled.

Do not use in place of a lever or crowbar.

Do not use it in place of a lever or crowbar. Do not use in place of a lever or crowbar.

Please use the correct shape and size for the intended use.