MOQ | 100 ton |
Port | Tianjin port , China |
Packaging | wooden pallet with steel belt |
Lead Time | 25 days |
low ash | low consumption |
EAF Material UHP 350 X 1800mm Graphite electrode for steel melting
Artificial graphite electrode is made of high-quality low ash
materials, such as petroleum coke, needle coke
and coal pitch.after calcining,burdening,kneading,forming,baking
and pressure impregnation, graphitization
and then precision machined with professional CNC machining.such
of the products own characteristics with
low resistivity, good electrical conductivity ,low ash, compact
structure,good anti oxidation and high mechanical strength, so it
is the best conductive material for electric arc furnace and
smelting furnace.
Notes
of the use of graphite electrode
1.The electrode holder should be held in the place beyond the
security line of the top electrode;otherwise, the electrode would
be easily broken.the contact surface between the holder and the
electrode should be cleaned up regularly to maintain a good
contacting,the cooling jacket of the holder shall be avoided from
water leakage.
2.Identify the reasons it there is gap in the electrode
junction,do not use them until the gap is eliminated.
3.If there is falling off of nipple bolt when connecting
electrodes,it is necessary to complete the nipple bolt.
4.The application of electrode should avoid of tilting operation,
particularly , the gr.oup of connected electrodes should not be
put horizontally so as to prevent from breaking.
5.When charging materials to the furnace,the bulk materials
should be charged to the place of the furnace bottom,so as to
minimize the impact of the large furnace materials on the
electrodes.
6.The large pieces of insulation materials should be avoided of
stacking on the bottom of the electrodes when smelting .so as to
prevent from affecting the electrode use,or even
broken.
7.Avoid of collapsing the furnace lid when rising or dropping the
electrodes,which may result in electrode damage.
8.It is necessary to prevent the steel slag from splashing to the
threads of the electrodes or nipple stored in the smelting
site,which may damage the precision of the threads.