MOQ | 1 sets |
Port | Qingdao,Tianjin,Shanghai |
Packaging | Main machines are packed in nude. Motors and other support equipments are packed into plywood case. |
Lead Time | 15-30 |
color | yellow |
Plate chain feeder (plate chain feeder) can be divided into light
plate chain feeder, medium plate chain feeder and heavy plate
chain feeder. They are respectively suitable for continuous and
even distribution and transportation of bulk density from the
storage bin to the crusher conveyor or other working machinery
and containers along the horizontal or inclined line section:
light machine is not more than 1200kg / m3, block weight is not
more than 140kg, and temperature is not more than 350 ℃ for
various block, granular and bulk materials. The medium-sized
machine is various loose materials with a weight of no more than
2400KG / m3, a block weight of no more than 500kg and a
temperature of no more than 400 ℃. The specifications of heavy
plate chain feeder are slot width 1000, 1250, 1500, 2000, 2500,
3150 mm, length 420 m, capacity 60-200 m3 / h.
It is mainly used in small and medium-sized cement plants as the
primary crushing feed of lime raw ore, and also suitable for
metallurgy, coal, chemical industry, electric power, building
materials, machinery manufacturing and other industrial
sectors.
[production capacity]: 60-1100t /
h
[feed particle size]:
500-1500mm
[motor power]:
11-45kw
1. BW plate chain feeder adopts
two-point support, one end is directly placed on the crusher, the
process layout is simple, and civil engineering cost is
saved;
2. The tail device of BW plate
chain feeder adopts special design, which is suitable for rainy
and humid areas. It will not cause the chain teeth jumping due to
the accumulation of wet materials, which will affect the
production.
3. There are sleepers at the tail
of BW plate chain feeder for shock absorption, and a certain
number of special shock absorption idlers in the middle, so as to
improve the stress conditions of the rollers and groove plates on
both sides impacted by large materials and improve the service
life of the running parts;
4. The left and right sides of the
lower cover of the head cover can be separated, so it is better
to prevent the lifting of the crusher rotor
body;
5. The traction chain and the
bearing chain are separated, the dynamic load is small, and the
service life is improved;
6. 13-15 teeth of chain wheel of
head device, odd and even teeth are separately driven, and the
service life can be doubled;
7. The sprocket of the head device
is cut into three teeth, and the teeth can be replaced without
dismantling the chain plate, which is easy to
maintain;
8. The width parameters of BW plate
chain feeder are designed according to the standards of
f.l.smidth (Denmark) and AUMUND (Germany).