This Intelligent Tension Controller is designed
for optimizing the performance of our own hysteresis brakes
and
clutches to work in different operating modes as required by
varies of applications.
Dimension:
Operating Mode
Open-loop Control:
01: Current
02: Torque
03: Φ Sensing Control
04: Φ Calculation Control
Closed-loop Control:
05: PD Position Control
06: PI Pressure Control
07: PID Position or Pressure Control
Technical Parameters
Voltage for hysteresis brakes and clutches at nominal torque and coil temperature of 120°C | 30 VDC |
Allowed Residual Ripple | 1.5V |
Operating Voltage Range | 24-36 VDC |
Open Circuit Power Consumption | < 150 mA |
Maximum Input Current (Depending on unit size) | 2.8 A |
Voltage Output | 10V±0.8V, 20 mA (Ra min=500Ω) |
Input Resistance | RE≥3.3kΩ |
Ambient Temperature | 0 to 50°C |
Storage Temperature | -30 to +70°C |
Humidity | DIN IEC68, part 2-30 |
Safety Class According To DIN 40 050 | IP 30 |
Rack | 92mm Plug-In Module |
Connection | 18-pin termainal |
Weight | 0.43 kg |