The Kontur 700 TP trunking machine is designed for applying thick-layer horizontal road marking of asphalt concrete and cement concrete roads with thermoplastics using reflective glass beads. Productivity of the machine is about 2000 m2/day. The block allows drawing lines from 5 to 40 cm wide in various combinations. As standard, the extruder is equipped with eight valves with a width of 5 cm; at the request of the customer, the width and number of valves can be changed. The valve opening control system allows you to draw solid noise lines, lines with a periodically changing profile and pattern. The extruder, brush and operator's seat can be installed both on the left and on the right side of the machine. Main technical specifications: - Kubota diesel engine: 63 kW; - width of the applied line with enamel: 5-40 cm; - automatically maintained thermoplastic temperature: 180 - 210 ° C; - capacity of a container for thermoplastic: 700 kg (350 l); - capacity of the container for glass beads: 190 kg; - thickness of the applied lines: 2 - 4 mm; - working speed: 1-5 km / h; - transport speed: up to 12 km / h; - maximum working slope of the road: 20%; - burner fuel consumption: up to 3.8 l / h; - overall dimensions (length, width, height), m: 5.5 x 2.2 x 2.7; - curb weight of the machine: 3500 kg; - gross vehicle weight: 4050 kg; - attendants: 2 people. Basic equipment of the machine: - control panel for road marking M12; - extruder for applying smooth lines of 500 mm; - sight; - illumination of the marking block and the operator’s workplace for night work; - sign "detour obstacles" 700 mm; - brush for cleaning the roadway; - remote button duplicating the start button of the control panel. Additional options: - extruder for applying smooth and structural lines; - joystick of the control panel; - a manual air gun for cleaning work equipment with air.