Replaceable aeration hose diffuser

Product Details

Our company uses the advanced technology and successfully developed a new type of oxygen aerator, aeration hose diffuser. It is used composite materials and special punching technology, the aeration hose diffuser can make small and slowly rising bubbles under low ventilation, greatly improving the oxygen transfer efficiency, linear aeration, uniform air distribution , and forming a vertical circulation, Stirring and mixing are more uniform. It ensures the good oxygen utilization and high power efficiency. The equipment has automatic cleaning function, and the oxidation rate will not decline during the service life.

Features

1）High oxygen transfer efficiency

We use the special punching technology, the punching is uniform and high-density, it produces tiny bubbles of about 1mm, the bubbles rise slowly, it increase the contact area and contact time with sewage, so it has a higher oxygen transfer efficiency

2）Stable oxygen utilization

It has the automatic cleaning function,

it avoids the problem of micropores being blocked and ensures the stability of oxygen utilization rate

3）Low energy consumption

There is no internal support structure, which reduces the resistance loss. Compared with the common aerator, the blower power required is smaller

4）Online maintenance

Using a unique installation method, open the quick-release joint during maintenance, extend the tail rope, and take out the aeration hose from the air pipe to achieve non-drainage maintenance

5）Long lifetime

Use the composite materials, it has high deformation resistance, tear resistance index, and high corrosion resistance to acid and alkali, and the designed service life is more than 8 years

Installation method

Using a unique installation method, the air distribution branch pipe is arranged in two layers, and one end of the aeration hose diffuser is connected with the air supply branch pipe with a quick-release joint. The other end is tied tightly with a composite rope, and the aeration hose diffuser can be bulged and flattened by opening and closing the valve on the air supply branch, this way can do the automatic cleaning of the aeration hose diffuser.

When replacing the aeration hose diffuser, you only open the quick-release joint on the tie rope and the air supply branch pipe.

The aeration hose diffuser can be drawn from the bottom of the pool along the device, and then return back to the original position along the tie rope after replacement. The whole process only needs 15 minutes by one person. No need to empty the pool, convenient and fast.