Fine Bubble Aeration Tube Diffusers

Product Details

Tubular membrane diffusers can be connected on one side or in pairs to different rectangular and round tubes (ABS material) with the appropriate adapter. The tubular membrane diffuser is manufactured with premium quality EPDM, Silicon rubber, PTFE material. The support tubes (ABS or PVC material)can be reused when membranes are replaced. The units offer maximum performance at minimum cost and require minimum maintenance.

1) The design of rubber gasket and corresponding groove ensures the air tightness of the product and replaces the raw tape during the installation process, which is convenient and reliable.

2) The locking hole is locked with the corresponding structure on the connecting piece to prevent the product from loosening. Through the airway design from the end to the end. When the product enters and exits the water, the sewage quickly circulates for counterweight or weight reduction to maintain the stability of the product structure, reduce the burden on the thread and the product, and avoid damage.

3）The wrench is locked in place, which is convenient and reliable for engineering installation, and avoids gripping the membrane and rotating it during installation, which may cause damage to the membrane.

4）The six-holes design increases the cross-sectional area of ventilation, reduces resistance, and is highly energy-efficient. Membrane multi-position to bear air friction. Reduce the wear, prolong the life of the aerator, promote 360-degree aeration of the product, and improve product efficiency.

5) Single ear clamp, the product is uniformly compressed in 360 degrees, and can play a spring adjustment effect when it expands and contracts with heat and when it is subjected to vibration.

6）Parts can be installed at the end of the tube diffuser. The parts are equipped with baffles and vent holes are reserved. The product can be weighted. The end is equipped with screw holes for fixing the end.

7）Double-layer non-return structure, when the product stops running, the membrane is covered on this structure under the action of resilience and water depth pressure to prevent muddy water from returning.

8）Built-in support structure to ensure structural stability and prevent product damage during processing, transportation, installation, and work.

FEATURES

●High oxygen transfer efficiency.

●High resistance to clogging.

●High resistance to corrosion.

●Wide air flow range.

●Low pressure loss.

●Low energy cost.

●Easy installation.

●Uniform fine bubble.

●Back flow prevention.

●Self cleaning operation.