poultry head and neck feather removal machine poultry plucker

Product Details

TJ60 Frame type poultry head and neck feather removal machine

1.Product features:

Frame type head and neck feather removal machine ,it is depend on the friction and collision between the duck /goose body and rubber finger to remove the duck and goose’s feather on head and neck, After this machine’s removal feather ,there is no damage to the head and neck’s skin, high efficiency in feather removal. this machine can be combined to use with other feather removal machine ,completely meet hygiene standard.

2.Technical parameters:

3.Packaging & Delivery

Packaging Details

Standard export plywood case packaging for small machine ,for huge machine will be nude package.

Delivery Time

Shipped in 20- 30 days after payment if no stock ,if machine is available ,we will ship it out within 7 days

4.Advantages of this machine:

(1) All stainless steel, convenient operation, stable performance, high efficiency and long life.
(2) Poultry body frict with rubber fingers to remove the head and neck feathers . with a heated shower tube cleaning ,the feathers will flow out at the same time,.

(3) After coming out from the machine , birds head and neck skin is not damaged, hair removal time is 30s.
(4) The lift mechanism adjustment flexibility, reliable self-locking position.
(5) The cabinet opening and closing mechanism is light and flexible , reset automatically which is easy to maintain and clean.
(6) This machine can be used in combination with other hair removal machine for small, medium and large-scale poultry slaughter lines.

(7) The device has a beautiful appearance and conforms to the national hygienic standard.

5.Attention:

(1) Install the leakage switch for grounding wire.

(2)Before using the machine, plug in the power and turn on the switch to check whether the discs are running properly.

(3) Use water to clean the feather removal barrel after using.

(4) After a time of using this machine ,the rubber fingers will be worn off ,please replace the rubber finger accordingly to guarantee the good feather removal effect and efficiency.

(5) After a time of using ,if you find the discs rotating speed is slow, it is possible that the belt shaft slips, then please tighten the engine base nut ,note pls don’t adjust too tight..

6.The method to change the rubber finger of this plucker machine

(1) Open the machine bank body from the middle of the machine .

(2) Take off the rotating discs with rubber fingers to be replaced .

(3)Use the slotted screwdriver to pry out the broken rubber finger, and then use the screwdriver to press the good rubber finger into the rotating discs holes.maybe it will be a little difficult to press the rubber finger into the rotating discs ,pls add a little lubricant oil or soap water to make it easy to replace the rubbter finger,Then replacing job is finished.

7.A general introduction of the line ,it is only for your kindly reference .

The Chicken Slaughtering Line is consist of electrical stunning, manual killing, automatic scalding and plucking, semi-automatic evisceration (manual evisceration on conveying line or manual evisceration on the stainless steel table based on customer’s need), automatic pre-chilling, semi-automation dewatering, by-products processing and packing processing.

Below is a simple sheet for your kindly reference:

1	Killing conveyor line	Chicken will be processed on this rail, it is main part for the main slaughter plant Production line.
		The distance of hangers is 8inch.
		Stainless steel chain, guide rails, stainless steel hooks, nylon hanger
2	Electric stunning machine	fiberglass reinforced plastic
		reliable and stable electrical devices
		L=1.5METERS
3	Scalding machine	This machine is used to scald the carcass of the chicken to remove the feather easily;
		Thickness of Board: 2mm,Upper Cover Thickness :1.2mm,Supporting Leg Thickness:2mm.
		Water temperature is between 58C°-61C°
		use blower system and the the motor take water to form water falls to hold the chicken body to have best scalding results.
		Power:6KW
4	A Frame refined Plucker	This plucker is dedicated device for chickens ,there are 4 main parts: Depilation, regulation section, guide part, spray part.
		Principal part is stainless steel
		Shape Size:3350*2350*2350 or customized
		De-feather Machine consists of six boxes .Each line has 12 plates .Total 6 lines with72plates.
5	Automatic cut head machine	this equipment use to automatically cut the chicken head on production line
		Principal part is stainless steel
6	Automatic cut claw machine	this equipment use to automatically cut the chicken feet on production line
		Principal part is stainless steel
		this equipment use dedicated accurate chuck location and have very good claw cutting effect
7	Unloading claws device	this equipment will be automatically take off the chicken feet from production line
		All body is stainless steel
8	Driving device	This machine is to run the whole hanging rail
		including: motor , reducer , brackets and other drive components
		Power:2.2KW By inverter power, run more smoothly.
9	Frequency converter	Frequency Controlling Box.
		Stainless steel Box
10	Tension device	To control the tightness of chain of production line to meet production requirements
		Stainless steel structure
11	Spiral precooling machine	This device can replace the previous precooling line to precool the chicken carcass
		This machine used to low down the temperature of carcass to keep the carcass good-looking and keep fresh in the forward process.The Thickness of the tank made of 3 mm stainless steel
		Spiral Pushing Device is made by 2mm thick stainless steel.
		Power 5.2kw/set
		One set of Fan to make bubbles in the water in the tank efficiently so that improve cooling result and clean the carcass too
		Buyer also need To Prepare cold Water or a set of ice machine,

8.Payment:

T/T,please arrange pay us 30% as deposit to begin the bulk production,and for balance ,you can pay us after your final inspection and before we book vessel for you.

9.Delivery time:

We will deliver within 20-30 working days after receiving deposit payment.

10.Warranty period:

All our machine is with one year warranty. Within warranty time . Machine breaking caused by machine itself design defect , we are responsible for it .we can provided free charge of breaking part, .If machine

breaking caused by human factor , user need take responsibility for it , we will provided technical support .

After one year warranty, we will provide spare parts with reasonable cost.

11.After-sales Service:

1.Before deliver the machine, we will test and adjust everything properly.

2. Once all is done, we will contact customer to make final inspection to our factory ,if customer not available ,we will make detailed picture for customer to confirm for delivery.
3. working manual will be provided with the machine, so that clients can use our machine without difficulty.
4. Any problems occur while using, we will provide profession advice and technical support ASAP.
5. Spare parts of the machine is provide whole serving life with reasonable price.

12.Our clients :

13. About Us

We are a professional poultry slaughter equipments manufacturer over 15 years in China, we can design different capacity poultry slaughter line and supply single function poultry slaughter machines ,we can also supply supporting food equipments for poultry abattoir such as the vaccum packaging machine and sterilization retort and so on,If any need for our machines or any questions for our machine, pls kindly contact me as below :