MOQ | 1 1 |
Port | shanghai/chongqing/guangzhou/ningbo |
Packaging | Wooden box with foam inside; |
Lead Time | 3~5days |
Product name | Transformer SFRA Tester Short Circuit Impedance Tester | Output Impedance | 50Ω |
Output voltage | Vpp-10V | Input impedance | 1MΩ (response channel built 50Ω matching resistor) |
Sweep range | 50Hz-2MHz or 50Hz-10MHz (optional) | Frequency accuracy | 0.001% |
Tester dimension | 31cm*15cm*5cm | Weight | 4.0KG |
Measuring wide dynamic range | -100dB ~ 20dB |
What is a Frequency Response Analyzer?
Frequency Response Analyzers (FRA), are also known as a Vector Network Analyzers (VNA) or similarly, Network Analyzers. FRAs perform frequency response analysis to graphically display a systems reaction to a set of test frequencies.
It is important to realize that the FRA is the frequency domain counterpart to the oscilloscope. A key point is that an oscilloscope makes measurements in the time domain, with the horizontal axis as a linear time scale and the vertical axis as the voltage or current scale. This is in contrast to an FRA which makes measurements in the frequency domain, with the horizontal axis as a linear or log frequency scale and two vertical axes representing the magnitude scale and the phase scale.
Generally, designers use an FRA to measure the transfer function of an electrical network. Additionally, the instrument can also be used to measure the input and output impedance of the network.
A point often overlooked is that he term Vector Network Analyzer is used mostly in RF design but both instruments are one and the same when it comes to measuring magnitude and phase.
Product Features:
1.
Collection control adopt high-speed , highly integrated
microprocessor;
2. Notebook with USB
interface for communication between the
instrument
laptops and USB
interface for communication between
instruments;
3. There is
communication wireless blue-tooth interface between
laptop computer and instruments;
4. The chipset adopt
DDS dedicated digital high-speed sweeping technology (
USA ) , though the testing, can accurately diagnosed
the winding distorted, drum kits, shift, tilt,
deformation of inter-turn short circuit and phase to
phase short circuit fault.;
5. High resolution
dB value measurement, dual-channel 16-bit A / D (
on-site test change the tap , means obvious output
change );
6. The signal output
amplitude can be adjusted by software, the maximum
amplitude peak ± 10V;
7. The computer
generates an electronic document testing results in
Word format;
8. Using precision,
high stability components, to the same-phase repeated
testing, the measurement repetition rate to
99.5%;
9. The finished
circuit board ,with a special process on the surface,
with water-proof and anti-harmful gas
functions;
10. the instrument
has a linear frequency sweep measurements and segmented
sweep measurement dual measurement system features two
techniques compatible with the current domestic genre
measurement mode;
11. The
amplitude-frequency characteristics meet the national
tester technical indicators standard. Abscissa (
frequency ) with linear and logarithmic indexing, so
the printed curve can be linear pitch curve points,
also can be a logarithmic curve, the user can choose
according to actual need;
12. Automatic
detection of data analysis system, horizontal
comparison A, B, C three-phase windings similarity
comparison, the results as follows: perfect
consistency,good consistency , ordinary consistency,
poor consistency. Vertical comparison, A-A, B-B, C-C
obtain the original data and the current data phase to
phase winding deformation comparison between, the
results as follows: normal winding deformation, mild
winding deformation, moderate winding deformation,
severe deformation deformation;
13. Automatically
generated Word electronic documents, for saving and
printing;
14. It fully meet the electricity standard DL/T911-2004 " power transformer winding deformation Frequency Response Analysis" technical conditions .
Packing list
NO |
Object |
Quantity |
1 |
Tester |
1 |
2 |
Power wire |
1 |
3 |
Test wire |
1 |
4 |
Ground wire |
1 |
5 |
BNC connecter |
1 |
6 |
Accessory bag |
1 |
7 |
USB wire(AA) |
1 |
8 |
Product CD |
1 |
9 |
Fuse 0.5A |
3 |
10 |
Print Paper |
1 |
11 |
Product instruction |
1 |
12 |
Survey report |
1 |
13 |
Product certification |
1 |
Chongqing Gold Mechanical&Electrical Equipment Co.,Ltd was founded in 2008. We have a strong team including top sales, skilled engineers and we have our own manufacture with high quality. we mainly design and manufacture the Transformer Tester, Circuit Breaker Analyzer, CT PT Analyzer, Hipot Tester , Relay Tester and so on for more than 10 years.
After several years’ development, our products have become high intelligent and wide coverage. And our company has become one of the leading manufacturer of oil purifier and electrical testing equipment in China;
We have
developed sales channels in many countries such as UAE, Saudi
Arabia, Malaysia, Thailand, Pakistan, India, Germany,
Belgium, USA, Mexico, Kenya, Nigeria, South Africa and other
countries worldwide.
And we have
gained strong advantage and high reputation in international
market.
Certificates:
Exhibitions:
Click “Send” for more information!