MOQ | 1 1 |
Port | shanghai/chongqing/guangzhou/ningbo |
Packaging | Wooden box with foam inside; |
Lead Time | 3~5days |
Product name | Sweep Frequency Response Analyzer Sfra Analysis SFRA Test | Measurement speed | single-phase winding 1.5 minutes to 3 minutes |
Sweep range | 50Hz-2MHz or 50Hz-10MHz (optional) | Input impedance | 1MΩ (response channel built 50Ω matching resistor) |
Measuring wide dynamic range | -100dB ~ 20dB | Frequency accuracy | 0.001% |
Supply voltage | AC220V ± 10% | Output voltage | Vpp-25V, adjusting automatically in test |
Width of measuring dynamic rang | -100dB~20dB |
Sweep Frequency Response Analyzer Sfra Analysis SFRA Test on Transformer
Power Transformer Winding Deformation Test Machine Sfra Test Kit
Introduction
Sweep Frequency response analysis, or SFRA, is a powerful tool to ensure the integrity of a power transformer. It is typically used to detect if the core and winding assembly has electrically or geometrically changed due to a short-circuit fault or a relocation. Furthermore it is used for routine diagnostic measurement, and for further diagnosis, if routine testing or monitoring identify irregularities.
A frequency response analyzer generates a signal with a certain frequency and a certain amplitude. The response of the electrochemical system to this signal is also a periodic signal. The frequency response analyzer measures both amplitudes and the phase shift (the time difference between the transmitted and received signal.
In electrochemical research, a frequency response analyzer is used to measure the electric current response as reaction to an applied potential wave. The magnitude allows calculating the impedance. You can do this for example with our GDRZ-902 potentiostat/galvanostat that has EIS capabilities.
Advantages of a Frequency Response Analyzer
A major advantage is the predictive value of tests that are made using a frequency response analyzer. A SFRA test (i.e. a frequency scan) does not take much time at all, while testing for corrosive properties by salt spray tests takes a very long time.
Features:
1 |
Using the advanced technical of DDS; |
2 |
Using the high speed and advanced microprocessor to design; |
3 |
Using double channels of AD chip of 16 bits; |
4 |
With seven inch LCD touch screen of which the brightness can be adjusted; |
5 |
With thermal printer of which the print thick can be adjusted; |
6 |
It could store one hundred and twenty groups of data, which could be read to current screen or upload to the PC; |
7 |
With PC software using which we could upload data ,test, analyze data, print data, or create word document; |
8 |
Using USB2.0 to connect to the device; |
9 |
Tester dimension:31cm*15cm*5cm; |
10 |
Weight:4.0KG |
Chongqing Gold Mechanical&Electrical Equipment Co.,Ltd was founded in 2008. We have a strong team including top sales, skilled engineers and we have our own manufacture with high quality. we mainly design and manufacture the Transformer Tester, Circuit Breaker Analyzer, CT PT Analyzer, Hipot Tester , Relay Tester and so on for more than 10 years.
After several years’ development, our products have become high intelligent and wide coverage. And our company has become one of the leading manufacturer of oil purifier and electrical testing equipment in China;
We have
developed sales channels in many countries such as UAE, Saudi
Arabia, Malaysia, Thailand, Pakistan, India, Germany,
Belgium, USA, Mexico, Kenya, Nigeria, South Africa and other
countries worldwide.
And we have
gained strong advantage and high reputation in international
market.
Certificates:
Exhibitions:
Chongqing Gold Mechanical & Electrical Equipment
Co.,Ltd.
Mobile: +86 151 2302 9823
Email:
WhatsApp/Skype:+86
151 2302 9823
Tel:86-23-62613622
Fax:86-23-62940030
Website:www.cqgoldequipment.com Add:25F, Huarun Center,
Xiejiawan Street, Jiulongpo District, Chongqing, China,
400050
Click “Send” for more information!