MOQ | 2 Metric ton |
Appearance | Light yellow or white liquid | pH | 7-8 |
viscosity,mpa.s | ≥1.5 | Resistance reduction rate,% | ≥70 |
Sample | 200g provided | Shelf-time | 1 year |
Brand | Silong | Country of Oregin | Henan, China |
Payment terms | TT 30/70, or ESCROW | Packing | Barrel, drum, IBC |
Friction reducer for fracturing use (Slip Water) JZ-10
In recent years, more and more attention has been paid to the exploitation of shale gas energy in various countries, which is the key technology for the reconstruction of unconventional reservoirs with low permeability and low porosity. The advantages of drag reducing agent (sliding water) fracturing fluid are low frictional resistance, low viscosity, low damage, low cost and reduced construction frictional resistance. It can effectively reduce wellhead pressure in large displacement construction, improve the carrying capacity of liquid, increase sand ratio, thus more conducive to the formation of network cracks and reduce the difficulty of construction.
一、Advantages of sliding water fracturing:
1. The traditional gel fracturing fluid system uses high concentration of gel. The residues of these gels and the cake produced during fracturing will block the formation and reduce the fracture conductivity. However, slip water fracturing fluid contains only a small amount of additives such as drag reducing agent, and is easy to discharge back, which greatly reduces formation and fracture damage, thus conducive to improving production.
2. The amount of chemical additives and proppants in slip water fracturing fluid is less, and the construction cost can be saved by 40%-60%. Because of the lower cost, many reservoirs that were not commercially exploitable could be developed.
3. Drag-reducing water can produce more complex and larger fracture network. This is due to the low viscosity of drag reduction water and the high pumping rate during construction. The increase of fracture complexity and volume increases the effective volume of reservoir stimulation and increases the production
4. Because the additive content in drag reduction water is less and cleaner, it is easier to recycle.
二、Perfermance Data
Perfermance |
Data |
Appearance |
Light yellow or white liquid |
pH |
7~8 |
viscosity,mpa.s |
≥1.5 |
Resistance reduction rate,% |
≥70 |
三、Product properties
1. Dispersion performance: Dispersion time can be used to characterize the dispersion performance of drag reducer. Dispersion time refers to the time required for the polymer to dissolve and demulsify and the polymer molecule to fully expand to the maximum viscosity. Dispersion is fast and does not need demulsification. Dispersion performance is good.
2. Drag reduction performance: Drag reduction performance of drag reduction agent is manifested in the acceleration of flow rate of drag reduction agent solution and the reduction of friction pressure drop: when the conveying pressure is constant, the drag reduction effect is manifested in the increase of flow rate; when the flow rate is constant, the drag reduction effect is manifested in the reduction of friction pressure drop. The drag reduction rate of slip water fracturing fluid is more than 70% after adding drag reduction agent for 3 minutes.
3. Use concentration 0.1%;
四. Packaging and Storage
This product is packed in 200 kg or 1000kg plastic drum. When loading, unloading and transporting, inversion and collision are strictly prohibited to avoid leakage. Store in a cool, dry and ventilated warehouse.
The product has a shelf life of six months from the date of production.
Friction reducer for fracturing use (Slip Water) JZ-10(MSDS)
Main Components:Polyacrylamide.
1. Risk overview
Risk Category: N/A.
Invasive Path: N/A.
Health hazards: no information
Acute poisoning: N/A.
Chronic effects: N/A.
Environmental hazards: N/A.
Flame and Explosion Danger: This product is flammable.
2. Emergency measures
Skin contact: Remove contaminated clothes and rinse skin thoroughly with soap and water.
Eye contact: Lift the eyelids and rinse them with flowing water or saline. Seek medical advice.
Inhalation: Departure from site to fresh air. If breathing is difficult, give oxygen. Seek medical treatment.
Intake: Animal experiments prove that the product will not be poisoned after ingestion.
3. Fire control measures
Dangerous characteristics: When water is used to extinguish fire, particles slip after meeting water, avoiding personnel slipping and falling.
Harmful combustion products: N/A.
Fire extinguishing method: No fire hazard.
4. Emergency treatment of leakage
Emergency treatment: particles become slippery after encountering water to avoid slippage and injury of personnel
5. Operational Disposal and Storage
Operational Notes: No Special Requirements
Storage Notes: Store in a cool, ventilated warehouse.
6. Contact control/personal protection
Personal Attention: No Special Requirements
Engineering control: Provide safe shower and eyewash equipment.
Eye protection: Wear chemical safety glasses.
Physical protection: No special requirements.
Hand protection: wash with plenty of water
Other protections: N/A.
800 meters west of the intersection of Petrochemical Road and Pushui Road