MOQ | 2 Metric Ton |
Appearance | Uniform liquid | pH | 5-9 |
Freezing point,℃ | ≤-10 | Open flash point,℃ | ≥50 |
Water solubility | Good solubility or dispersion | Emulsification tendency | No tendency to emulsify |
Corrosion inhibition rate | ≥70% | Pitting corrosion | No obvious pitting corrosion |
Sample | 200g provided | Payment terms | TT 30/70 |
Shelf-time | 1 year |
Anti-hydrogen sulfide imidazoline corrosion inhibitor KL-06 for oilfield use
Hydrogen sulfide well corrosion inhibitors are water-soluble film-forming inhibitors with imidazoline and organic heterocyclic quaternary ammonium salts as main components and other additives. Their main components are ethoxy organic amines, quaternary ammonium salts and heterocyclic amino groups introduced on the basis of imidazoline. It can be used for corrosion protection of the inner walls of oil and gas pipelines and pipelines in the process of oil and gas exploitation and gathering, as well as corrosion protection of carbon steel metal corrosion caused by high salinity oil wells with high H2S and chloride ions and medium and low carbonate ions. It can effectively reduce hydrogen embrittlement and sulfide stress corrosion cracking.
一、Perfermance Data:
Perfermance |
Data |
|
Appearance |
Uniform liquid |
|
pH |
5~9 |
|
Freezing point,℃ |
≤-10 |
|
Open flash point,℃ |
≥50 |
|
Water solubility |
Good solubility or dispersion |
|
Emulsification tendency |
No tendency to emulsify |
|
Corrosion inhibition performance ,30mg/L |
Corrosion inhibition rate |
≥70% |
Pitting corrosion |
No obvious pitting corrosion |
二、Scope and method of application
1. The corrosion inhibitor is used to control the corrosion of oil and gas wells, gathering pipelines and sewage treatment systems. It has good inhibition on hydrogen sulfide corrosion, good compatibility with inorganic salts and polymers, and no damage to formation.
2. The product can effectively control the corrosion caused by hydrogen sulfide and minerals.
3. The product can synthesize a variety of corrosion inhibitors based on different types of amines, alcohols, ethers, phosphides and sulfides according to the use temperature and medium.
4. Because of the pertinence of the technology, the effect of block management and system anti-corrosion is better.
5. Construction safety and pollution-free
6. The operation of annulus or endpoint feeding is simple, and the dosing concentration is adjusted according to the specific situation. The corrosion inhibitor for hydrogen sulfide-resistant oil and gas wells has better corrosion protection effect in Oilfield with high salinity. After adding the inhibitor, the uniform corrosion rate is controlled below 0.01 mm/a; at 120 ppm injection concentration, the corrosion inhibition rate can reach 95%, and at 80 ppm injection concentration, the corrosion inhibition rate is also higher than
三、Transport and storage
The product is packed in plastic drums with a net content of 25 kg or 200 kg. It can also be packed according to user's requirements.
This product should be transported according to the routine chemical products, not forced impact; products should be placed in ventilated, cool and dry warehouses, away from fire sources. The product is valid for one year.
800 meters west of the intersection of Petrochemical Road and Pushui Road