Nock Skinex SB 496
Automatic Fish Skinning Machine
Conveyorized fish skinning machine comes with a transport
roller, dynamic cleaning roller, water cleaning unit for
processing fresh fish, spring suspended pressure unit, and a
hard pressure roller for fish. This machine also comes with S
technology and a special application for low-loss skinning of
fish.
Features:
3 methods of skinning:
- Deep skinning with a sharp blade
- Thin skinning (shallow skinning) with a sharp blade
- Pulling-off the skin with a blunt blade (silver skinning)
Application:
Conveyorized fish skinner with S technology and special
application for low-loss skinning of fish with thin skin such
as tilapia, pangasius (Basa), trout, cod, catfish, squid, etc.
Standard:
- Transport roller (AISI 316L) without peripheral grooves but
with a dynamic cleaning roller made of stainless steel (S
technology)
- Water cleaning unit for steady continuous operation
- Blade gap infinitely adjustable
- Spring suspended blade holder for perfect skinning results
- Pressure roller spring, air filled balloon, or special hard
pressure roller has adjustable balance weights depending on
which product being used
- Infeed conveyor and discharge conveyor; can be taken out of
the machine within seconds and without any tools
- NOCK POWER PLATES for the machine’s construction, which is
easy to clean, robust, and service friendly
- NOCK EASY-FLOW safety cover
- Lockable castors
- Stainless steel
- Stainless steel bearings
Technical Specifications:
- Cutting width: 430mm
- Cutting speed: 24m/min
- Maximum throughput height: 70mm
- Blade gap: 0-4 mm infinitely adjustable
- Apply length on infeed conveyor: 400mm
- Infeed conveyor (1): 850x425mm
- Discharge conveyor (1): 850x425mm
- Overall dimension: 800x1190x1860mm (WxHxD)
- Weight: 240kg
- Motor performance: 0.75kW
- Voltage: 400V 50Hz 3Ph (other voltage options available)
- Water connection: G 1/2 internal thread
- Water consumption: approx. 200l/h
Options:
- Discharge conveyor for removed skin
- Transport roller with coarse toothing
- Foot switch and infeed table for “manual” operation with
open top machine
- Turn around device for the automatic skinning of both sides
of flat fish with 2 machines