Compliance
ICAO Annex 14
Volume 1, Seventh edition, 2016, table 6.3 Low Intensity Type A
/ B / E Obstacle Light
FAA
L-810
Features
Electrical
3 high power CREE
LED, make sure LED keep bright while use
Power supply in
DC(48V)& AC(110-240VAC), the light could work normally when
input 48VDC/110VAC/240VAC
LED power supply
board includes short circuit and open circuit protection, Line
surge protection by metal oxide varistor
Physical
Bird deterrent
spike on top
UV protection
Powder coated bright yellow color base make better visibility
and also long life in harsh environments
3/4inch thread
hole make pole installation easy
No screw fix type
- just twist, the cover will be fixed tightly
System
design
Built-in
photocell for day/night operation(dusk to dawn operation,
automatically turn on when background luminance is below
50cd/m2
Steady(factory
setting)/20FPM/30FPM/60FPM DIP switches on PCB
Surge and
lightning protection
Optional
Alarm contact(NO
COM NC)for remote monitoring
Infrared LED for
pilot using NVG
GPS sync
flashing
Application
AH-LI-B2
low-intensity light could be used alone on the top of the
High-rise Building, High Chimney, marking towers (Telecom,
GSM, Microwave & TV), High Pole, Tower Crane, Wind Turbine,
etc when the height is lower than 45m.
When obstacle
object is higher than 45m, AH-LI-B2 can be used with
Medium-intensity or high-intensity obstruction light to
indicate hazardous obstructions with a steady red safety
light.
Description
|
Parameter
|
Light
Source
|
LED
|
Flash
Characteristics
|
Steady-burning/20/30/60
adjustable
|
Operation
Mode
|
Dusk-to-dawn
Automatically as standard.
|
LED Life
Experience(hours)
|
>100,000
|
Operating
Voltage
|
DC(12V,
48VDC) or AC(110-240VAC) or others
|
Body
Material
|
Polycarbonate
|
Base
Material
|
Die-casting
aluminum
|
Weight(kg)
|
0.3
|
Ambient
Temperature(℃)
|
-40~55
|
Storage
temperature(℃)
|
-55~70
|
Humidity
|
10%-95%RH(No
condensation)
|
Wind
Speed
|
240Km/h
|
Waterproof
|
IP66
|
FAA
|
L-810
|