Compliance
ICAO
Annex 14 Volume 1, Seventh edition, 2016, table 6.3 Medium
Intensity Type B / C Obstruction Light
FAA
L-864
Features
Electrical
CREE
ultra high intensity LED as light source saving power
consumption and maintenance than incandescent light or halogen
lamp
Power
supply available in DC(12V, 24V, 48V) or AC(110-240VAC)
Physical
UV
protection Powder coated bright yellow color base make better
visibility
Special vent
installed under base to make sure the air could go through but
water is avoid, so that the whole light temperature won’t be
high, to avoid the High pressure steam goes inside.
System
design
Built-in photocell
for day/night operation(dusk to dawn operation)
Surge
and lightning protection
Optional
Dry
contact Alarm output for remote monitoring
Flashing rate(20,
30, 40, 60, Steady mode)
Application
AH-MI-B2
medium-intensity light is used on the top of the High-rise
Building, High Chimney, marking towers (Telecom, GSM, Microwave
& TV), High Pole, Tower Crane, Wind Turbine, etc when the
obstacle height is 45-105meter, and most time work with low
intensity lights installed on the lower place.
Description
|
Parameter
|
Horizontal
Output(degrees)
|
360
|
Vertical
Divergence(degrees)
|
3
|
Operation
Mode
|
Dusk-to-dawn
Automatically as standard
|
Operating
Voltage
|
DC(12V,
48VDC) or AC(110-240VAC) or others
|
Product Life
Expectancy
|
10 years
Plus
|
Ambient
Temperature(℃)
|
-40~55
|
Storage
temperature(℃)
|
-55~70
|
Wind
Speed
|
240Km/h
|
Options
Available
|
Flashing
rate
|
|
NVG(Night
Vision Goggles) compatible LED
|
|
Dry contact
alarm(NO COM NC)
|
|
RS485
communication
|
|
Bird
deterrent spike
|
|
IOT
monitoring
|