Please wait while your account is being registered at Tradewheel.com Loading Spinner

Join World's Fastest Growing B2B Network

Industrial Used Wood Chips Sawdust Rotary Drum Dryer Machine Price

Quick Details (View All)

Model NO.6GT- 1.2*10 Operation PressureAtmospheric Dryer
Drum Number3 TypeDrum Dryer
Model6gt- 1.2*10 Output (T/H)1.3-1.5
Power (Kw)7.5 Rotating Speed (R/Min)3-8
Gradient (%)3-5 Weight (Kg)4500
Raw MaterialClay, Wood Chips, Sawdust, Coal Powder StructureRotary Type Drier
SprayerAir-Flowing Type Transport PackageInternational Standard Packing
SpecificationCE TrademarkLEABON
OriginHenan, China HS Code8474
Production Capacity1.3-1.5t

Product Details

  • Overview
  • Product Description
  • Product Structure
  • Product Parameters
  • Our Advantages
  • Spare parts
  • FAQ
  • Company Profile
  • Related Product
Overview

Product Description

Industrial Used Wood Chips Sawdust Rotary Drum Dryer Machine Price
Product Description

Brief Introduction of Wood Dryer

It is suitable for dryingsensitive material like sawdust, rice hull, milledwheat straw, milled cotton / corn stalksand so on.
It is made up of heat stove, tube, impulse jar, function tube, fan, and cycloneseparator.
It can reduce moisture from 40-45% to 8-12%.
Fuel for the furnace: wood waste, coal. Waste oil and so on.
(Note: If the moisture of raw materials is more than 45%, the furnace required the bigger, please inform us when ordering.)

Raw material
This dryer can used to dry sawdust,wood chips,clay,etc.
Product Structure

The Structure of Wood Dryer:

The rotary drying machine is composed of stove, main rotary body, which reduces the moisture from 60% to 10%. The moisture evaporating capacity of our rotary drum dryer can reach to (250kg per hour to 8000kg) per hour. Different density materials, the final product are not the same; Also for different moisture of raw materials, which could get the different final capacity.
Product Parameters

The Main Specification of Wood Dryer:

Model Dia of roll Length of roll Gradient Speed (rpm) Weight (t) Power (kw) Cubage (m³)
6GT- 0.6×8 φ600 8m 3-5 8 5.1 4/6p 2.26
6GT- 0.8×10 φ800 10 m 3-5 7.2 6.9 4/6p 5.02
6GT- 1.0×10 φ1000 10m 3-5 6.73 7.5 5.5/6p 7.85
6GT- 1.2×12 φ1200 12m 3-5 5.8 13.1 11/6p 13.31
6GT- 1.5×12 φ1500 12m 3-5 4.8 22.3 15/6p 21.2
Our Advantages

The Advantage of Wood Dryer:
1). Air heating system is able to allow highly efficient removal of water from fresh harvested forage, and the maximum durability of dehydrated forage.
2). Non-pollution to the target materials guarantees minimal loss of their color, favor, and nutritional ingredients;
3). Smoke collector working with the air heating system adopts water-recycled wet-type collecting method, and ensures the exhausted gas to satisfy the environmental protection requirement as well as the lowest water consumption.

Spare parts

The Spare Parts of Wood Dryer

The whole system consists of fan blower, motor engine, fuel boiler, steel pipe, cyclone and air lock.

The Principle of Wood Dryer
The wet materials are conveyed to the hopper through the belt conveyor or bucket elevator, and then enter into the feed end through the hopper charger and the feeding pipe in sequence. The inclination of the feeding pipe must be greater than the natural inclination of materials in order to make the materials flow into the dryer smoothly. The dryer cylinder with slight inclination with the horizontal line.
The materials enter from the higher end, and the heat carrier enters from the lower ender; The two contact each other from opposite directions, but there are also circumstances that the heat carrier flows into the dryer body together with the material. Along with the rotation of cylinder, the materials run to the lower end due to gravity. In the forward movement of wet materials in the dryer body, the wet materials are heated directly or indirectly by the heat carrier to dry the wet materials, and then the materials are discharged from the discharge end through the belt conveyor or screw conveyor.
FAQ

(1). What is your raw materials and moisture content of it?

-----Different moisture content of your raw materials, with different size of Rotary Drum Sawdust Dryer for you.
We need to know what is your raw materials, moisture content of it? and final capacity demand?

(2).What is your fuel for rotary drying machine?
-----There are kinds of biomass could be Fuel for Rotary Drying Machine, if you have special demands please let us know. Like: Automatic Feeding Fuel for Rotary Drying Machine or not?

(3).Rotary Drying Machine Adjustable Items:
-----Feeding Heat Temperature Could Adjustable, Rotation Speed Adjustable.
All according to your raw materials information, moisture content and capacity demands.

Customers feedback
Company Profile

Company Introduction:


Kinds of woodworking machine
Related Product

Click the pictures or word to get more information for the machines

Ring die wood pellet mill Ring die wood pellet line Flat die wood pellet line


Note:
How to contact us ?
Send your Inquiry Details in the Below , Click "Send" Now !
Register Your Company