Hot Sale Drum Dryer Wood
Sawdust Rotary Drier in Europe
Description
1)The rotary drying machine is composed of stove, main rotary
body, which reduces the moisture from 60% to 10%. The moisture
evaporating capacity of our rotary drum dryer can reach to
(250kg per hour to 8000kg) per hour. Different density
materials, the final product are not the same; Also for
different moisture of raw materials, which could get the
different final capacity.
2)It is suitable for dryingsensitive material like sawdust,
rice hull, milledwheat straw, milled cotton / corn stalksand so
on.
3)It is made up of heat stove, tube, impulse jar, function
tube, fan, and cycloneseparator.
4)It can reduce moisture from 40-45% to 8-12%.
Fuel for the furnace: wood waste, coal. Waste oil and so
on.
(Note: If the moisture of raw materials is more than 45%, the
furnace required the bigger, please inform us when
ordering.)
Advantage
1). Air heating system is able to allow highly efficient
removal of water from fresh harvested forage, and the maximum
durability of dehydrated forage.
2). Non-pollution to the target materials guarantees minimal
loss of their color, favor, and nutritional ingredients;
3). Smoke collector working with the air heating system adopts
water-recycled wet-type collecting method, and ensures the
exhausted gas to satisfy the environmental protection
requirement as well as the lowest water consumption.
Main Specification
Model
|
LB-GH-650
|
Initial moisture
|
30%-40%
|
Final Drying Moisture
|
10%-15%
|
Fan power
|
7.5KW
|
Drum Power
|
2.2KW
|
Drum size
|
650MM*10M
|
Drying Pipe Diamet
|
300MM
|
Cyclone diameter
|
900MM
|
Dimensions
|
20M*3M*3.5M
|
Direct Hot Wind Stove Size
|
2000*1000*1300MM
|
Fuel (firewood) Consumption
|
100-120KG/H
|
Drying Speed
|
500-600KG/H
|
Machine Weight
|
3900KG
|
Principle of Wood Dryer
The wet materials are conveyed to the hopper through the belt
conveyor or bucket elevator, and then enter into the feed end
through the hopper charger and the feeding pipe in sequence.
The inclination of the feeding pipe must be greater than the
natural inclination of materials in order to make the materials
flow into the dryer smoothly. The dryer cylinder with slight
inclination with the horizontal line.
The materials enter from the higher end, and the heat carrier
enters from the lower ender; The two contact each other from
opposite directions, but there are also circumstances that the
heat carrier flows into the dryer body together with the
material. Along with the rotation of cylinder, the materials
run to the lower end due to gravity. In the forward movement of
wet materials in the dryer body, the wet materials are heated
directly or indirectly by the heat carrier to dry the wet
materials, and then the materials are discharged from the
discharge end through the belt conveyor or screw conveyor.
Packing & Delivery
Related products
We also produce wood pellet production line.complete biomass
wood pelleting plant manufacturers is the process of making
waste materials into solid fuel. The biomass pellet mainly used
for fuel.If you want to get more detail,Welcome to contact us
.
FAQ
(1). What is Your Raw Materials or Tell Us Your Materials
Moisture Content?
-----Different moisture content of your raw materials, with
different size of Rotary Drum Sawdust Dryer for you.
We need to know what is your raw materials, moisture content of
it? and final capacity demand?
(2).What is Your Fuel for Rotary Drying Machine?
-----There are kinds of biomass could be Fuel for Rotary Drying
Machine, if you have special demands please let us know. Like:
Automatic Feeding Fuel for Rotary Drying Machine or not?
3).Rotary Drying Machine Adjustable Items:
-----Feeding Heat Temperature Could Adjustable, Rotation Speed
Adjustable.
All according to your raw materials information, moisture
content and capacity demands.