Port | shanghai,ningbo |
Packaging | plastic box |
Lead Time | 3 |
Application:
Suitable for commercial and industrial use, it can cut canvas,
synthetic fabric, cloth, rope and cord, lightweight foam, KT
board,webbing belts,tube,plastics etc
FEATURES
-- Mainly used for cutting low density materials.
-- After cutting, the fracture is smooth, no loose edges, no
burrs.
-- Can cut foam, low density sponge, pearl cotton, KT board,
extruded board and other materials.
-- Low voltage output, safe and reliable, the output voltage
does not exceed 5V, safe and reliable.
-- Alloy blade, pure copper knife seat, high temperature
resistance, strong hardness and no deformation.
-- Infinitely temperature-controlled, the relative temperature
can be adjusted according to different materials, and the
effect is higher.
CAUTIONS
1. Avoid direct contact between the two blade holders to cause
a short circuit.
2. Turn the temperature adjustment knob to the middle position,
place the blade on the cutting object, and then press the
trigger. The hot knife is preheated for a few seconds to cut.
It is recommended to do the cutting test on the waste material
first.
3. It is best to keep the temperature and speed in harmony when
cutting.
4.Reduce the blade temperature or release the switch
intermittently If there is too much smoke.