Products and Company
Introduction :
XS CARBON supply DC Copper
Coated Pointed Gouging Rods, DC Copper Coated Jointed Gouging
Rods, DC Copper Coated Flat Gouging Rods.
Specifications
1) Dia: 5mm-8.5-16-19-25mm
2) Length: 300-305-355-400-455-510
3) Fixed Carbon: 98%
4) Ash< 0.9%
5) Copper Layer: 0.08-0.10mm
Arc-Air Gouging Copper Coated
Carbon Electrode. The carbon electrode for carbon arc gas
planning is an electrical Pole used in the carbon arc gas
planning. The electrical arc can be produced between electrode
and metal objects as electrical Pole and metal objects form
electrical loop. The heat produced by electrical arc melt metal
and compressed air blow away melt metal residues around the
carbon electrode. The technology of using this method to cut
metal or make slots on metal or remove redundant metal parts is
called carbon arc gas planning.
The carbon electrode is mainly used in steel, iron, brass, hard
alloy, stainless steel and other metal to slot, planning
welding lines, remove redundant metal parts, cutting, making
holes, filling the welding line defects and so on.
Products Specification :
Model
|
Dia * Length
|
Standard Current Range (A)
|
mm
|
Inches
|
B503.2
|
3.2*305
|
1/8*12
|
130-180
|
B504
|
4*305(355)
|
5/32*12(14)
|
150-200
|
B505
|
5*305(355)
|
3/16*12(14)
|
200-250
|
B506
|
6*305(355)
|
15/64*12(14)
|
300-350
|
B506.5
|
6.5*305(355)
|
1/4*12(14)
|
320-370
|
B507
|
7*355
|
9/32*14
|
350-400
|
B508
|
8*305(355)(510)
|
5/16*12(14)(20)
|
400-450
|
B509
|
9*305(355)
|
23/64*12(14)
|
450-500
|
B510
|
10*305(355)(510)
|
3/8*12(14)(20)
|
550-600
|
B511
|
11*305(355)(510)
|
7/16*12(14)(20)
|
700-750
|
B512
|
12*305(355)
|
15/32*12(14)
|
850-900
|
B513
|
13*305(355)(430)(510)
|
1/2*12(14)(17)(20)
|
800-1000
|
B516
|
16*355(430)(510)
|
5/8*14(17)(20)
|
1000-1200
|
B519
|
19*355(430)(510)
|
3/4*14(17)(20)
|
1400-1500
|
CARBON ELECTRODE STARC PERFORMANCE
STANDARD
Electrical resistance ≤25μΩm
Breaking Strength ≥22 Mpa
Bulk Density ≥1.50g/cm3
Ash content ≤ 0.8%
Water Conten ≤ 0.2%
Fixed Carbon ≥ 98.5%
Introduction for
Use :
1. Carbon rods must be kept dry and can only be used when they
are damp.
2. When used in DC power supply, the carbon rod is connected to
the positive pole of the power supply and the negative pole is
connected to the working.
3. The pressure of compressed air is kept at 0.5-1.6mpa
4. The arc distance between the carbon rod and the workpiece is
about 3 mm, and the carbon rod exposed to the fixture is about
100 mm
5. The carbon rod and the workpiece form an included angle of
45 ° and planed along the tangent (or straight line)
direction.
6. Carbon rods must be well ventilated when used. Operate
according to the working current.
--------------------------------------------------------------------------------------------------------------------------------------------
Products Details Photos
Show :
XINGSHI
CARBON AND GRAPHITE , WELCOME YOUR INQUIRY . THEN OFFER YOU
BEST !