Inconel 625 Coil Introduction
Alloy 625 is face-centered cubic lattice structure. Dissolve out the carbon granule and instability quaternary phase, then change it to stability Ni3 (Nb,Ti) trimetric lattice around 650°C after a long time heat preservation. nickel-chromium content will strength the mechanical performance in the state solution while suppress the plasticity.
Inconel 625 Coil Characteristic as below
1. Excellent corrosion resistance of different kinds of media in both oxidation and reduction environments.
2. Excellent
resistance of pitting and crevice corrosion, and won't happen
stress corrosion cracking because of chloride.
3.Excellent resistance of the inorganic acid corrosion
performance, such as nitric acid, phosphoric acid, sulfuric acid,
hydrochloric acid and the mixture of sulfuric acid and
hydrochloric acid.
4. Excellent corrosion resistance of different kinds of inorganic
acid mixture performance.
5. Good corrosion resistance of a variety of concentrations of
hydrochloric acid when the temperature up to 40°C .
6. Good machining and welding, no weld cracking sensitivity.
7. Have pressure vessel authentication for the wall temperature
between -196 ~ 450°C .
8. Apply for the highest standard lever VII of acidic environment
by the NACE ( MR-01-75) authorized.
Inconel 625 Coil Specification
Item | Size |
Plate/Sheet | 0.5~60.0mm (THK)*2000mm(WIDTH)*6000mm(LENGTH) |
Bar (Round) | Φ5.5~250mm |
Bar (Square) | 40~240mm*40~240mm |
Strip | 0.05~3.0mm (THK)*≤420mm(WIDTH) |
Seamless Pipe | 0.2mm~508mm (OD)*0.5mm~18mm(WT) |
Welded Tube | 0.5mm~120mm (OD)*0.05mm~10mm(WT) |
Wire | Φ0.1mm~18mm |
Inconel 625 Coil Parameters
Item | Chemical Composition (%) | ||||||||
Inconel 600 | C | Mn | Si | S | Cr | Ni | Fe | Cu | |
≤0.15 | ≤1.0 | ≤0.5 | ≤0.015 | 14.0~17.0 | ≥72.0 | 6.0~10.0 | ≤0.5 | ||
Standard | |||||||||
Sheet/Plate | Round bar/Wire | Pipe | Tube | ||||||
ASME SB-168 AMS 5540 |
ASME SB-166 AMS 5665 |
ASME SB-163 ASME SB-167 ASME SB-751 ASME SB-775 AMS 5580 |
ASME SB-516 ASME SB-517 ASME SB-751 ASME SB-775 |