Bovie Surgi Center Pro
Bovie Surgi Center Pro Features
The Bovie Surgi Center Pro is a 200-watt high power, operating
room generator, by Bovie®. The unit incorporates the power and
safety of a premium OR generator at significant savings to the
medical facility. The system delivers 12 monopolar and bipolar RF
energy modalities to provide a high level of surgical precision.
The Surge-Center Pro ESU offers Pure Cut, four (4) modes of
Blend, three (3) modes of Coagulation, Bipolar Coagulation and
Bovie FCFS™ technology allowing the Doctor to move almost
effortlessly from Monopolar to Bipolar during the procedure.
Enough power to perform any procedure in a
surgery center and most Hospital OR procedures
The highest in safety and quality were built
into a 200-watt generator for maximum reliability with
economy
Specialized Laparoscopic Mode
Dual Monopolar Spray Activation
Bovie Surgi Center Pro Specifications
Dimensions
Height: 6.5 In (16.5 cm)
Width: 14.75 In (37.5 cm)
Depth: 18.1 In (46 cm)
Weight: < 20 lbs (< 9.07 kg)
Operating Parameters
Ambient temperature range 10° to 40° C
Relative humidity 30% to 75%,
non-condensing
Atmospheric pressure 70kPa to 106kPa
Warm-up time If transported or stored at
temperatures outside the operating temperature range, allow one
hour for the generator to reach room temperature before use.
Transport
Ambient temperature range -40˚ to +70˚ C
Relative humidity 10% to 100%, including
condensation
Atmospheric pressure 50kPa to 106kPa
Storage
Ambient temperature range 10˚ to 30˚ C
Relative humidity 30% to 75%,
non-condensing
Atmospheric pressure 50kPa to 106kPa
General
Audible/Visible Output Meter: Yes
Contact Monitoring Systems: BovieNEM
Contact Monitoring Systems
Range/Trip Point: 10
ohms or less over entire
operating range (10C°
to 40°C)
Cooling System: Passive Cooling
Technology: Isolated RF Output
Pre-set Feature: Yes
Monopolar HP Ports: 2
Dual Activation Tone Alert: Yes
Connector Ports/Power Switch: White
Bipolar
Macro Bipolar
Watts: 80
VPeak Max Voltage:
600V
Crest Factor
(Typical): 1.5 ± 20%
Frequency: 490 kHz ±
4.9 kHz
Micro Bipolar
Watts: 80
VPeak Max Voltage:
500V
Crest Factor
(Typical): 1.5 ± 20%
Frequency: 490 kHz ±
4.9 kHz
Standard Bipolar
Watts: 50
VPeak Max Voltage:
250V
Crest Factor
(Typical): 1.5 ± 20%
Frequency: 490 kHz ±
4.9 kHz
Monopolar
Cut I
Watts: 200
VPeak Max Voltage:
1000V
Crest Factor
(Typical): 1.7 ± 20%
Frequency: 490 kHz ±
4.9 kHz
Cut II
Watts: 200
VPeak Max Voltage:
750V
Crest Factor
(Typical): 1.7 ± 20%
Frequency: 490 kHz ±
4.9 kHz
Blend (1)
Watts: 200
VPeak Max Voltage:
1320V
Crest Factor
(Typical): 1.8 ± 20%
Frequency: 490 kHz ±
4.9 kHz
Blend (2)
Watts: 200
VPeak Max Voltage:
1475V
Crest Factor
(Typical): 2.0 ± 20%
Frequency: 490 kHz ±
4.9 kHz
Blend (3)
Watts: 200
VPeak Max Voltage:
1650V
Crest Factor
(Typical): 2.2 ± 20%
Frequency: 490 kHz ±
4.9 kHz
Blend (4)
Watts: 200
VPeak Max Voltage:
1870V
Crest Factor
(Typical): 2.4 ± 20%
Frequency: 490 kHz ±
4.9 kHz
Pinpoint Coagulation
Watts: 120
VPeak Max Voltage:
1800V
Crest Factor
(Typical): 3.1 ± 20%
Frequency: 490 kHz ±
4.9 kHz
Spray Coagulation
Watts: 120
VPeak Max Voltage:
4000V
Crest Factor
(Typical): 6.0 ± 20%
Frequency: 350 to 450
kHz
Gentle Coagulation
Watts: 120
VPeak Max Voltage:
450V
Crest Factor
(Typical): 1.6 ± 20%
Frequency: 490 kHz ±
4.9 kHz