Big capacity 3 ton electric sugarcane juice extractor sugar cane mill

 Product advantages:

1.Use a deceleration motor,The reduction motor wave box is precise in processing,
the transmission efficiency is over 98%, and the power consumption of the whole
mechanical and electrical power is greatly saved.The structure is more compact and
the equipment is lighter.

2.Double bearing double seal design, can not let the juice contact bearings, as far as
possible to reduce the possibility of contact between the design of double bearing
double sealing of the products, each bearing a double seal assembly, and each bearing
assembly 2 bearing double insurance, greatly improve the reliability. Three rollers are
different, three kinds of division of labor, three roller surface treatment using 3
processes, respectively, split, pull, rolling three different processing effect. Split a roll
into several pieces of sugarcane, which can avoid the machine, second roller when
squeezed more dry; pull the pattern of a roller to pull the cane, cane smoothly dragged
into the roller pattern; third rollers are shallow lines of sugarcane for the final press,
this product squeeze the juice rate as high as 80%.

Operation instructions:

1.Before use should check the machine, remove the dirt inside the machine, the gear
and the oil cup add lubricating oil.
2.Determine the diesel engine or power supply and the use of the requirements of the
machine, to determine the correct direction of rotation.
3.First start the sugarcane machine, run for 1 minutes, until the machine running
properly, then add sugar cane.

Safety instructions:
1.Cleaning, maintenance, moving the machine, we must cut off the power supply.
2.Wet hands can not contact the plug, the beginning of careful electric shock.
3.The use of this product, not to allow children to approach.
4.Please put the machine in a smooth place to use.
5. Do not touch the running parts of the machine by hand.
6.Such as in the use of the process of failure, should immediately shut down the
power supply, stop using, for inspection.
7.Such as product failure, in order to avoid danger, please don't open repair, please
promptly with our company or local dealer contact.
8.Pay attention to the switch of the positive and negative direction signs, prohibit the
fingers into the body.
9.Not the nails, needles and other metal objects into the machine is running, so as not
to damage parts.