Automatic Stainless Steel Belt Type Filter Press for Dehydration Treatment

Product Details

The belt filter press is a kind of filter press which uses the squeezing and shearing action between two filter belts wrapped around a series of rollers of different sizes in order to remove the water in the slurry.

Dense dehydration: Chemical and treatment stages.The belt filter press has a high requirement for flocculation effect. The machine adopts a unique dosing mixer to realize rapid flocculation.

Gravity dehydration: Phase of gravity concentration and dehydration.The sludge is uniformly sent into the mesh belt through the cloth hopper. The sludge moves forward with the filter belt. The free water flows into the sink through the filter belt under the effect of gravity.

Low/medium pressure dehydration: wedge-shaped pre-pressure dehydration stage.After gravity dehydration, the sludge fluidity requirement of the pressing dehydration stage was still not satisfied, and the slight extrusion dehydration at this stage ensured the sludge to be successfully pressed for dehydration.

High pressure dehydration: The filter cake is repeatedly squeezed with the upper and lower filter belt around the press roller to make the cake less water.

1. Bearing housing adopts fully sealed structure.Outsourcing wear resistant rubber for long using life.

2. The machine surface adopts high pressure sandblasting so that can remove rust and oxide scale. Spray four layers of fluorocarbon paint, which can resist acid and alkali corrosion for more than 10 years.Key parts such as dewatering roller, fender, nozzle adopt stainless steel.

3. The filter screen is of high strength, not easy to block, easy to clean.