input | 100-240v |
Aokux good quality helipad lights heliport light Heliport Inset Light
Model AO-HP-IL1, Heliport Inset light is always be installed at
locations where the lights are frequently knocked down by
aircraft or maintenance vehicles. It could be used as Aiming
point light, perimeter light of FATO(Final approach and take-off
areas), TLOF (Touchdown and lift-off areas), taxiway, runway,
flight path Lighting, etc. The emitting color is green or
yellow.
Compliance:
1. ICAO Annex 14 Volume ǁ Heliports 5.3.
2. Power supply available in AC(110-240V AC),
DC48V
Features:
1.
LED
as light source saving power consumption and maintenance, 95%
less power than equivalent incandescent light.
2.
Power
supply available in AC(110-240 VAC), DC 48V.
3. Pressure resistance lens allowed the vehicles
go through on light.
4. Die-casting aluminum covered by hard
anodizing layer have good corrosion protection and load
bearing.
5. IP68 waterproof ensure light work fine
underground
Specification:
Model NO.: | AO-HP-IL1 |
Light Source | high intensity LED |
Available Colors | Green & Orange |
Intensity(cd) | ≥100cd |
Flash Characteristics | Steady burning |
Operation Mode | 24 hours operation |
LED Life Experience(hours) | >100,000 |
Operating Voltage | AC220V, AC120V, DC48V |
Power(W) | 7W |
Body Material | Aluminum alloy |
Cutout size | ¢199mm×140mm |
Dimension(mm) | ¢194mm(D)×138mm(H) |
Weight(kg) | 4.5KG |
Product Life | 5 years Plus |
Ambient Temperature(℃) | -55℃~+70℃ |
Humidity | 0%-100% |
Wind Speed | 80m/s |
IP grade | IP68 |
Life time | >5 years |
Dimension(MM):
Application:
Helipad/Heliport
TLOF areas
Heliport
FATO areas
Helipad
Runway
Helipad
taxiway
Aiming
point light