Port | SH |
Packaging | ctn |
Lead Time | 8 |
input | 100-240v | COLOR | White |
Model AO-HI-A3 Type A
High Intensity Aviation Obstruction Light
flashing white color 24 hours and designed for marking top of
obstacle that exceed 150 meters in height. Ultra high intensity
CREE LED is used for the light source ensure light’s long life
experience and good performance.
Compliance:
1.
ICAO
Annex 14 Volume 1,'Aerodrome Design and Operations’ Sixth edition
2016, table 6.3 High-intensity Type A White Obstacle
Light.
2.
FAA
L-856.
Features:
1.
CREE
ultra high intensity LED as light source saving power consumption
and maintenance than incandescent light or halogen
lamp.
2.
Power
supply available in DC(12-48V DC) or AC(110-240V
AC).
3.
Unique
design and UV protected reflector for converging light and saving
LED power.
4.
UV protection Powder coated bright yellow color base make better
visibility
5.
Body
material is die casting aluminum which has strong corrosion
resistance, Shock and Vibrations
protection.
6.
Special
valve installed beside the base to make sure the air could go
through but water is avoid, so that the whole light temperature
won’t be high to destroy the light.
8.
Built-in photocell for day/twilight/night
operation.
9.
Surge
and lightning protection.
Specification:
Model NO.: | AO-HI-A3 |
Light Source | CREE high intensity LED |
Available Colors | White |
Light Intensity(cd) |
200,000cd±25%(Daytime) 20,000cd±25%(Twilight) 2,000cd±25%(Night) |
Horizontal Output(degrees) | 120 |
Vertical Divergence(degrees) | 3-7 |
Flash Characteristics | 40-60 flashes per minute |
Operation Mode | 24 hours operation, 3 different modes |
LED Life Experience(hours) | >100,000 |
Operating Voltage | DC(12-48V DC) or AC(110-240V AC) |
Power(W) |
<80W |
Circuit Protection | Integrated |
Body Material | aluminum |
Base Material | Powder coated die-casting aluminum |
Mounting | 540×160×θ12 |
Dimension(mm) | 580×290×365 |
Weight(kg) | 9KG |
Product Life | 5 years Plus |
Ambient Temperature(℃) | -40℃~+60℃ |
Humidity | 0%-100% |
Wind Speed | 80m/s |
IP grade | IP67 |
Available Options |
1. Powder-coated color 2. Infra-Red (IR) for NVG(Night Vision Goggles) 3. GPS Sync Flashing |
Dimension:
Application:
AO-HI-A3
Type A High intensity light is is used on the top of the
High-rise Building, High Chimney, marking towers (Telecom, GSM,
Microwave & TV), High Pole, Tower Crane, Wind Turbine, etc when
the obstacle height is more than 150m, and most time work with
low intensity lights & medium intensity light installed on the
lower place.