NCF-AVMP adaptive anti-vibration multi-parameter vortex flowmeter is an upgraded version of the previous anti-vibration multi-parameter vortex mass flowmeter, while succeeding its advantages. The new version is applicable to various media, with outstanding vibration resistance, low starting velocity, and strong durability (no moving parts). It is easy to install with no impulse lines or auxiliary equipment, and is not affected by the calibration medium. It can be widely used for flow measurement in industries such as petroleum, chemical industry, metallurgy, electric power, light industry, urban heating, gas supply, water supply and drainage industries.
12 |
Direct diagnosis of sensor’s faults and disturbances |
No |
Yes |
Product technical indicators
Measuring media:
Gas steam low viscosity liquid
Specification (nominal diameter):
Full Pipe Series
DN25、DN32、DN40、DN50、DN65、DN80、DN100、DN125、DN150、DN200、DN250、DN300
Plug-in Series
Circular pipe of any diameter between φ200 mm~φ4000 mm
Rectangular tube with a length of no more than 4000 mm
Vibration interference immunity:
It is immune to continuous vibration with vibration acceleration (≤5 m/s2) and sudden vibration under the lower limit sensitivity of 4m/s air at normal temperature and atmospheric pressure.
Higher fluid density or lower limit of measurement results in stronger vibration interference immunity.
Material:
Table: Stainless steel
Transmitter housing: cast aluminum alloy
Ambient temperature range (operating state):
No local display: -40℃~85℃
LCD screen: -20℃~70℃
Environmental humidity range:
5%~90% RH. No condensation