Aluminum bar grating is a non-rusting and light weight metal structure commonly used as walkways, stair treads, access covers and platforms in construction of reservoirs, plants, ships, barges, also used as metal flooring in breweries, bottling plants, food processing and storage facilities, used as architectural mesh panels for facade, sunshade, air vent and metal cladding. Aluminum grating panels are available in standard or anodized finishes.
Aluminum Grating Type: flat bar grates: plain type, plain I type, serrated type, serrated I type; cross bar grating: round type and square twisted type.
Swaged Rectangular Aluminum Grating - Most Widely Used Aluminum
Grating
Swaged rectangular bar grate provides clean, crisp lines and the
cross bar is fully locked within the bearing bar, slightly below
the top surface.
"SGI" Swaged "I-Bar" Aluminum Grating - High Efficient and Skid
Resisting Grating
This type of aluminum grating carries the same load as 3/16”
thick rectangular bar type aluminum grating, but weighs slightly
less per square foot. Additionally, the striated top and bottom
flanges of the "I" bar provide enhanced skid resistance without
the cost of serration.
"SGF" Swaged Flush-Top Aluminum Grating - Design Suitable for
Pedestrian Traffic Walking Surface
Manufactured with a unique, extruded cross bar that is flush with
the top surface of the bearing bars after swaging, this aluminum
grating provides an enhanced walking surface for areas subject to
continuous pedestrian traffic.
Aluminum Dovetail Pressure Locked Grating - Architectural Mesh
Panels
The deep cross bars of the dovetail gratings are popular for
architectural applications, to be used as sun shade panels and
decorative infill panels, with the deeper cross bar serving as
architectural accent.
Aluminum Bar Grating Products:
6063-T6 Aluminum Bar Grating
Architectural Aluminum Grille Bar Gratings
Aluminum Platform Bar Grating
Swage-Locked Aluminum Bar Grating
Bar Serrated Aluminum Grating
Press Lock Aluminum Grating
Press Lock/Dove Tail, Smooth Surface
Spacing - 7/16" x 4" Spacing
1" x 3/16" Bearing Bar to Run Parallel to Length
1" x 3/16" Edge Trim Band
Grating Set to Cover 125.25" Width x 115" Length Span
Supplied at Pieces
36-1/16" Wide x 115" Long
16-13/16" Wide x 115" Long
Grating Set to Cover (2 Spans) 91" Width x 119" Length Spans
Supplied per Set
36-1/16" Wide x 119" Long
18-9/16" Wide x 119" Long
Features:
Light weight-easy to install and clean;
Nice appearance-high strength-ventilation and light can pass
through;
Material saving-slip-resistant and safe;
Heavy loading and durable