air jet loom

MOQ	1 set
Packaging	standard packing
Lead Time	15 days

Contact Now

Product Details

Technical Parameters

Nominal reed width(cm)	170, 190,210, 230,260,280,300,340,360,380
The Effective reed width(cm)	Normal reed width: 0---60cm(≤260cm); 0---80cm(≥280cm)
Spun yarn	Ne 100 ———— Ne 2.5
Filament	22dtx ———— 1350dtx
Weft selection	Two colors, four colors, six color with continuous expansion function
Stopping brake	Positioning and stopping controlled by electromagnetic brakes
Starting mode	Super start motor drive : 2.2 KW (crank shedding)、3.0KW(cam shedding)、 3.7KW(dobby shedding)、6.5KW(jacquard shedding); Motorized spindle(optional)
Running operation	Two-hand operation button
Weft insertion rate	Maximum weft insertion rate： 2300 m / min
Nozzle	Combination of main nozzle and auxiliary nozzle; Auxiliary main nozzle; Stretch nozzle
Reed	Profiled reed
Length measurement and weft storage	Electronic Length Measurement（FDP）； Mechanical Length Measurement（RDP）
Crank shedding	4-piece type； 6-piece type；
Positive cam shedding	Up to 10 pcs heald frame
Positive dobbyshedding	Up to 16 piece heald frame
Type of loose warp	Positive loose warp device; Negative loose warp device
Let off	Electronic let off; Double warp beam(optional)
Diameter of the beam flange	Ø800mm, Ø914mm(optional), Ø1000mm(optional)
Dropper stop motion	Mechanical dropper stop motion; Electronic dropper stop motion(optional)
Standard desity	25——300 pick/inch
Beating-up shaaft	“U” shaped beating-up shaft; Solid straight beating-up shaft
Beating-up	four-linkage beating up （narrow width）； six-linkage beating up（wide width）
Weft cutting	Mechanical weft cutting device ; Electronic weft cutting device(Optional)
Warranty	1 Year
Lead time	30-45 Days

www.haijiamachinery.com

Product innovation points

●High Productivity

The "U-shaped beating up mechanism" is adopted to increase the beating up force and at the same time greatly improve the weaving capability due to the reduction of the vibration generated by the beating up mechanism.

●High Stability

The new strong and tough frame structure is adopated to avoid the deformation of the frame and to make the loom run more stably during high-speed operation .

Adopting self-designed integrated wall board and improving the frame structure, which improves the rigidity of the frame, reduces the deformation deficiency of the frame during operation, and enhances the operation stability of the whole machine.

●High Suitability

The new rear beam structure realizes the external warp let off drive, which makes the let off more uniform. The blanced tension reduces the let off error and improves the excellent rate of fabric.

●High Quality

The "U" type weft beating mechanism is adopted, and the reed seat support arm adopts the power balance structure, which increases the beating force and reduces the vibration of the weft beating mechanism to a large extent, which is an important link to improve the high-speed manufacturing performance.<span "="" style="box-sizing: border-box; margin: 0px; padding: 0px; list-style: none;">

●Energy-Saving

By optimizing the air pipe and shortening the opening time of the auxiliary nozzle, the air consumption is reduced by 10% and also the electric power consumption is reduced under the same weaving conditions.

Improved the connection of electrical air circuit, optimized the weaving procedure, improved the operation speed of electrical components, and reduced the energy consumption of equipment operation.

● Less Operating Cost

Improvement of the connection of the air circuit to achieve good energy-saving effect during the operation of the machine and reduce the operation cost of the customer.