400*1800mm HP carbon graphite electrode rod with 3 nipple
Minerals and Metallurgy, Graphite Products, Graphite Electrodes
Application scenario
-
The electrode holder
should be held in the place beyond the security line of
the top electrode;otherwise, the electrode would be
easily broken.the contact surface between the holder and
the electrode should be cleaned up regularly to maintain
a good contacting,the cooling jacket of the holder shall
be avoided from water leakage.
-
Identify the reasons it
there is gap in the electrode junction,do not use them
until the gap is eliminated.
-
If there is falling off of
nipple bolt when connecting electrodes,it is necessary to
complete the nipple bolt.
-
The application of
electrode should avoid of tilting operation, particularly
, the gr.oup of connected electrodes should not be put
horizontally so as to prevent from breaking.
-
When charging materials to
the furnace,the bulk materials should be charged to the
place of the furnace bottom,so as to minimize the impact
of the large furnace materials on the electrodes.
-
The large pieces of
insulation materials should be avoided of stacking on the
bottom of the electrodes when smelting .so as to prevent
from affecting the electrode use,or even broken.
-
Avoid of collapsing the
furnace lid when rising or dropping the electrodes,which
may result in electrode damage.
-
It is necessary to prevent
the steel slag from splashing to the threads of the
electrodes or nipple stored in the smelting site,which
may damage the precision of the threads.
Click here for more information