Z10003 0.96 Inch LCD Display 128*64 4 Lane SPI Interface

MOQ

1 pc

Contact Now

Product Details

Size: 0.96 inch

Resolution: 80*160

Interface: 4 lane SPI

Driver IC: ST7735R

View Angle: IPS

Brightness: 300 cd/m²

Touch Panel: Support CTP/RTP

Supply Type: Factory/Manufacturer

Certification: ISO9001, IATF16949, ROHS, REACH

Overview of Z10003 0.96 Inch LCD Display 128*64 4 Lane SPI Interface



Z10003 is a color active matrix thin film transistor (TFT) liquid crystal display (LCD) with 80*160 resolution. IPS (In-plane Switching) technique make this 0.96" LCD module have a wider view angle. This LCD display is built-in ST7735R driver IC. This a-Si TFT LCD come with 4-wire SPI interface.



If you have special requirement, like drive IC, interface, FPC, touch panel, backlight, etc, we can also customize for you.



Our factory carry out ISO 9001: 2015 and IATF16949: 2016 quality standard system strictly, all the LCD display passed ROHS, REACH Certification.



The 0.96" LCD screen is widely used smart watch, bracelet, medical oximeter, cosmetic instrument, household appliance, translator, etc.

Specification of 0.96 Inch LCD Display 128*64 4 Lane SPI Interface

Item	Main Display	Unit
Number of Pixels	80 * RGB * 160	Pixel
LCM Outline Dimension	13.5 (W) * 27.95 (H) * 1.55 (T)	mm
LCD Outline Dimension	13.2 (W) * 26.99 (H) * 0.4 (T)	mm
Active Area	10.8 * 21.696	mm
Pixel Pitch	0.0135 *0.1356	mm
Display Mode	Normally Black
Pixel Arrangement	RGB Vertical stripe
Viewing Direction	ALL
Color Configuration	RGB
LCD Transmittance	Typ: 4.89%; Min: 4.4%
LCD Contrast Ratio	Typ: 800; Min: 640
FPC Version	Z10003-P12 V1
Interface	4 LINE SPI
Operating Temperature	-20℃ ~ 70℃
Storage Temperature	-30℃ ~ 80℃
Backlight Arrangement	1 LED
Luminance	-
Weight	-

Pin Definition of 0.96 Inch LCD Display 128*64 4 Lane SPI Interface

PIN NO.	PIN DEF.	FUNCTION DECS.
1	GND	Ground
2	LED-K	POWER SUPPLY- FOR BACKLIGHT CATHODE
3	LED-A	POWER SUPPLY+ FOR BACKLIGHT ANODE
4	VCC(3.3V)	Power Supply for Analog, VCC 3.3V.
5	GND	Ground
6	GND	Ground
7	D/C	Display data/command selection pin in 4-line serial interface.
8	CS	Chip selection pin; Low enable, High disable.
9	SCL	This pin is used to be serial interface clock.
10	SDA	SPI interface input/output pin. The data is latched on the rising edge of the SCL signal.
11	RESET(3.3V)	This signal will reset the device and it must be applied to properly initialize the chip. Signal is active low.
12	GND	Ground