Member's Area
Messages 
Need Help
XGS28 self-propelled Telescopic Mobile Elevating Work Platform
developed with Max. working height at 28.2m, max. payload at
340kg, max. gradeability at 45%; this vehicle is structured as
three sections of telescopic arms and tower arm mechanism, with
a small fly jib, featuring wide work range. Dual payload
control system is adopted to adjust the work range depending on
the payload, meeting the different loading requirements and
thus becoming an ideal selection in the construction of
building, bridges, steel structures and stadiums.
Product Highlights:
* 4m wide platform, enough for carrying tools and materials.
* The jib is enable to fly over some obstacles and thus to
reach the inaccessible position.
* Dual payload control system could adjust the work range by
itself according to the payload, meeting the different
loading requirements.
* The boom and the upright are luffed and raised at the same
time with one single cylinder, speeding up the approaching of
work area, making the construction more effective, suitable
for the relatively low and narrow site.
* Maintenance-free shaft bushing and slider could ease the
friction at each articulated point and slider and better the
adaptation to the welding and dusting environments, as well
as greatly dropping the fault ratio and the service life of
complete vehicle.
* The power system integrates the electronic-control engine,
the oil pressure sensor, the coolant temperature sensor, the
rpm sensor and other. Safe and reliable ECU is equipped with
fault diagnostic port, making the fault diagnosis and
maintenance easier.
Browse Through Millions of High-Quality Products. 