XM1003K road milling machine is a high-performance 1m-wide
milling machine mainly used for the digging and renovation of
asphalt concrete pavements in highways, downtown roads,
airports, cargo yards, and parking lots.
* The milling drum in diameter of 930mm is installed to achieve
the 300mm maximum milling depth and remove the whole asphalt
concrete pavement by single cycle.
* The 45m/min working speed is higher than the like products.
Three working speeds are provided to achieve more accurate
matching between working speed and working load.
* The milling drum is driven by mechanical belt to achieve
higher drive efficiency than hydraulic drive.
* The super-high capacity water tank and fuel tank (860L and
450L respectively) guarantee longer continuous working time and
reduce the down time.
* The intelligent sprinkling control technology is applied so
that the sprinkling is turned off automatically at the stop of
milling and is turned on automatically at the restart of
milling to save the manual operation steps.