WTPL WT03 Dual Pole Walk Through Mobile Phone Detector

Description

This mobile phone detection system consists of two sensor poles (Dipole). Each pole has six equally spaced sensors connected to a micro-controller.

Detected data are spontaneously wireless transmitted to a Main Controller. Data are further analyzed by the main controller to determine if a mobile phone has passed through this Dipole.

When a person walks through the Dipole with a mobile phone, signal strength (above the background noise level) of each detector is displayed on Main Controller''s LED panel instantaneously with respect to its position.

In the mean time, main controller will sound alarm, active dry contact, or establish wireless or TCP/IP communication with a remote computer depends on customer''s preference.

Dipole is very lightweight and easy to set up. Since it is a reactive system, dipole does not generate any harmful strong RF driver signal.

Dipole and the main Controller consume very low power suitable for non-stop operation. System does not need any operator to monitor like a metal detector.

Moreover, Upgraded Idle Standby Phone Walk Through Detector (TCP/IP Plus) can work with one or multiple IP cameras for remote monitoring and warning.

When someone with a phone walks through cell phone door detector, you will get sound and image alerts quickly.

A photo capture pops up to show you who has a phone
on our software interface. IP camera''s address and time stamp also on the photo. Only the detected photos are stored in the recorded files so you can efficiently find out who have phones without replaying all recorded videos of the IP cameras.

Features

3 versions of the detector are available i.e.

Standard version: It beeps when a phone is detected.

TCP/IP version: Show you the locations of the detected phones on the map via TCP/IP

TCP/IP Plus Advanced version: Remote monitoring version can work
with one or multiple IP cameras to show you a photo that who has a phone

Specifications

Dipole Detector Pole spacing: < 70 cm
Single pole: Height:170 cmDiameter: 3 cmWeight: 5.6Kg Base Dimension: 30 x 20 x 4 cm 2.4 GHz, < 0 dBm, 16 channel ISM transmitter Power Supply: 110~220VAC to 5VDC adapter ** Can be mounted on wall directly.Controller 16 channel ISM receiver with External Antenna (Up to meters to Dipole.) Wall mount plastic housing: 25 x 18 x 5 cm LED display: 15 x 10 cm 0.5 Watt adjustable alarm speaker 5V TTL output 10A, 120VAC /5A, 240VAC Relay TCP/IP Ethernet RJ45 port with Window software (monitor up to 10 dipole systems) Power supply: 100V~240VAC