1.
Equipment introduction:
The washing tower is a new type of industrial waste gas treatment
equipment, which is widely used in industrial waste gas and dust
removal, acid and alkali waste gas, painting industry, printing
industry, pharmaceutical industry and other fields, the most
commonly used and most practical processing equipment.It can
effectively process HCL, HF, NH3, H2SO4, CrO3, HCN, NAOH, H2S,
HCHO, etc.Various industrial organic waste gases and inorganic
waste gases.
2.
Structure and working principle
The industrial waste gas enters the washing tower and is in full
contact with the washing liquid in the tower to generate a
neutralization reaction to achieve the treatment purification
effect, effectively remove dust and other various gases, and
finally meet the discharge requirements.
3.The equipment features:
1. Low noise, stable operation, simple operation, low cost,
etc.
2. In addition to high dust efficiency, it can handle various
gases by using syrup and water.
3. Using high-quality PP sheet, corrosion-resistant, anti-aging,
long service life, and can be customized according to
requirements;
4.
Technical Parameter Table :
Air volume (M3/H) |
Size (mm) |
THK (mm) |
Drain outlet (mm) |
Water tank size(mm) |
Inlet and outlet size (mm) |
Pump (KW) |
Wind resistance (Pa) |
3000 | 800 | 8 | DN32 | 600*700*H700 | 315 | 0.75 | 500 |
5000 | 1000 | 8 | DN40 | 600*800*H700 | 400 | 1.5 | 500 |
8000 | 1200 | 8 | DN40 | 600*1000*H700 | 500 | 2.2 | 500 |
10000 | 1500 | 10 | DN40 | 700*1000*H700 | 550 | 2.2 | 500 |
12000 | 1600 | 10 | DN50 | 700*1000*H700 | 600 | 3.75 | 500 |
15000 | 1800 | 10 | DN50 | 700*1200*H700 | 650 | 3.75 | 500 |
20000 | 2000 | 10 | DN50 | 700*1200*H700 | 750 | 5.5 | 500 |
25000 | 2200 | 10 | DN50 | 700*1200*H700 | 950 | 5.5 | 600 |
30000 | 2500 | 12 | DN65 | 700*1200*H700 | 1000 | 5.5 | 600 |
35000 | 2700 | 12 | DN65 | 1000*700*H700 | 1100 | 7.5 | 600 |
40000 | 2900 | 12 | DN65 | 1000*700*H700 | 1200 | 7.5 | 600 |
45000 | 3000 | 12 | DN65 | 1000*700*H700 | 1250 | 7.5 | 600 |
1.This form is a common size and we can customize different sizes
and requirements according to your needs.
2.The material is polypropylene.
3.Equipment design wind speed 1.8m/s
Any enquries , please call me at :
ANNA
WAHTSAPP/WECHAT :+86-13082199157