WCB Y Strainer Flange Ends Fuel Filter with Differential Pressure Gauge

Product Details

The KRYG1B4F type filter is an indispensable device in the pipe system that conveys gas and other media. It is generally installed at the inlet of gas equipment, used for removing particle impurities in natural gas, liquefied petroleum gas and other media and protecting normal use of valves, flow meters, pressure control devices, etc.


Product description:

1. Material: WCB, SUS304, PTFE gasket, O rubber ring, etc.
2. Filter meshes: 50 M/in² or customer requirements
3. Working Pressure: 1.6-6.4 MPa
4. Design temperature:-29ºC- +60ºC
5. Connection: flange
6. Flange Standard: GB
7. Features: the body is anticorrosive, durable, the differential pressure gauge with the memory of the max data, easy to installation.
8. Design and Manufacturing Standards: SH/T3411-1999, HG/T21637-1991, GB/T36051-2018

Notes for use:

a. Keep the filter cavity clean before installation to prevent impurities from entering and affecting the use effect.

b. When the filter is tested for hydraulic strength, the intake valve should be closed first. After the test is completed, use 0.6MPA air pressure to conduct airtightness test on the filter, differential pressure gauge and pressure guide tube. After the pressure is stabilized, slowly open the two intake valves at the same time to avoid damage to the differential pressure gauge caused by excessive unilateral pressure .

c. According to the working conditions on site, it is recommended to periodically drain and clean the filter.

d. KMO reminds that when the pressure difference table shows that the inlet and outlet pressure difference reaches 0.03MPA (or specified by the user), it is recommended to clean the filter element. Cut off the inlet and outlet valves of the filter, and ensure that there is no pressure and medium in the inner cavity, take out the detachable filter element, use a brush to gently remove impurities, and then clean and reload. If the cleanliness of the filter element still cannot meet the working conditions after cleaning, it is recommended to replace with a new filter element.

e. After each cleaning, you need to re-test to ensure the tightness of the product, and replace the air in the filter with nitrogen.

f. Close the intake valve before venting, and slowly open the two intake valves at the same time after the pressure is stable, to avoid damage to the differential pressure gauge caused by excessive unilateral pressure.

More details please reference to follow pictures:

FAQ:

Q: Are you manufacture or trading company?
A: We are manufacture and our factory is in in Oubei Town, Yongjia County, Wenzhou City, Zhejiang Province.

Q: What is your products' MOQ?
A: 10pcs.

Q: Can you provide the sample for free?
A: Yes, we can provide the sample for free, but you need bear the delivery cost.

Q: If products have some quality problem, how would you deal with?
A: We will responsible for all the quality problems.

Q:If the product can be customized?
A: Yes, just let me know if you have any requirements, like applicable medium and size, etc