Water Jet Cutting Machine with Doule Intensifiers Pump for Nice Quality Machine

Quick Details (View All)

Model NO.	YH-double intensifier pump	Type	Five-Axis
Name	Water Jet Cutting Machine	Max Operating Pressure	60000 Psi
Voltage	380V	Weight	1500kg
Transport Package	Wooden Box	Specification	1.5m1.4m1.3m
Trademark	YH-double intensifier pump	Origin	Shanghai
HS Code	8401200000	Production Capacity	10pieces /Month

Product Details

Product Description

Product Description
A water jet cutter, also known as a water jet or waterjet ,is an industrial tool capable of cutting a wide variety of materials using a very high-pressure jet of water, or a mixture of water and an abrasive substance. The term abrasivejet refers specifically to the use of a mixture of water and abrasive to cut hard materials such as matel or granite, while the terms pure waterjet and water-only cutting refer to waterjet cutting without the use of added abrasive, often used for softer materials such as wood or rubber.

Maximum Pressure(PSI/BAR)		60000/4137
Output Flow(GPM/LPM)		1.24
Max. Nozzle Diameter(Inch)		0.015
Recommended Nozzle Diameter (Inch)		0.010*2
Motor	Horsepower		60
	Three phase Voltage		190 to 440(50hz) 200 to 575(60Hz)
	Motor Power (KW)		45
Intensifier	Num. of Intensifier		1
	Proportion		20:01
	Reversing Type		Electric
Oil Pump	Fluid Type		Rexroth 71C.C/Rev*1ea
	Capacity of tank (Gallons)		35
Controlling Type		Metrologic 1000
Double Pressure Transformation		Remote control by Table
Operation Panel	Pressure Control		Manual knob
	Pump on/off PB		Standard & remote
	Emergency Stop PB		Standard & remote
	Pump Running State		Lamp
	Fault Message		Lamp
	Hydraulic Pressure Gauge		Standard
	Water Filter Table		Standard
	Stopwatch		Standard
	High Pressure Water Meter		No
Accumulator Size		125in³(2.2 Liter)
Minimum Cooling Water Flow Rate(GPM)		4
Water Inlet	Preposition Booster Pump		Standard, Built in unit belt driven off of special motor/pump coupling.
	Recommend Intake Pressure (PSI)/(GPM)		Over15/2.5
Environment Temperature		2ºC to 49ºC
Relative Humidity		Up to 95% @ 49ºC
External Dimension(LWH,Unit:mm)		16078511484
Weight(Kg)		1100
Notice		Only one intensifier operates at a time

Advantages & Versatility:

Water Jet cutting uses high pressure water to cut softer material like rubber and foam. When abrasives are added to high pressure water the resulting abrasive jets cuts harder material like steel, glass, titanium, hard rock, bullet-proof glass, and ceramics etc. The high pressure water is forced through a tiny orifice to concentrate high energy in a tiny area to cut. The water is pressurized using an intensifier pump to a pressure of 6200 bar (90,000 psi) and forced through a tiny orifice of 0.15 mm to 0.35 mm diameter creating a high velocity of beam.

Advantages of Water Jet cutting

1.Environment friendly: With Water and sand as cutting medium, no hazardous wastes are generated and the cutting process is environmental friendly.

2.High thickness cutting: Water Jet can cut up to 170 mm Stainless Steel; 250 mm Aluminium ; 300 mm Titanium.

3.High Accuracy: Water Jet cutting machines can cut material with a positional accuracy of +/- 0.03 mm.

The indicated value refer to a measured length of 1000 m at RT 20 C +1 C according to VDI/DGQ3441.

4.Machine virtually can cut any 2D shape: Water Jet can cut any 2 dimensional profile from most of the material.

5.High edge quality: Leaves a satin smooth finish thus reduces secondary operations.

6.Minimal or no fixtures required: As the force of the water jet is vertically down, no fixtures are required for most of the material due to negligible side forces. Thin sheets may require some weight to be placed.

7.Saves raw material: When machining or roughing out expensive materials such as titanium, the scrap still has a high value. This is because they will give chunks, not chips. It is possible to get more parts from the same material because of the abrasive jets low kerf width.

8.One tool universal application: Water Jet uses one cutting head for all material or operation, no need to change tool based on material or operation. The figure shows the machining of 2D shape with single tool for multiple operations such as slots, radii, holes, and profile in 1 to 2 minute setup.

Our team and service:

We've committed ourselves to the success of our customers for over 40 years. As a result, nearly 1 out of every 3 systems built is delivered to repeat customers. We are proud to provide the largest and most highly trained support team, with the experience to ensure your success.