Member's Area
Messages 
Need Help
| MACHINE MODEL | SLA758 | |||
| INJECTION UNIT | A | B | C | D |
| SCREW DIAMETER （MM） | 90 | 95 | 105 | 110 |
| SCREW L/D RATIO （L/D） | 23.2 | 22.2 | 19.9 | 19 |
| INJECTION PRESSURE（Mpa） | 195 | 175 | 143 | 130 |
| SHOT VOLUME（CM³） | 2926 | 3260 | 3983 | 4371 |
| INJECTION WEIGHT (G) | 2583 | 2878 | 3515 | 3858 |
| INJECTION RATE(CM³/S) | 593 | 661 | 808 | 887 |
| SCREW SPEED(RPM) | 108 | |||
| INJECTION STROKE(MM) | 460 | |||
| CLAMPING UNIT | ||||
| CLAMPING FORCE(KN) | 7580 | |||
| TOGGLE STROKE(MM) | 950 | |||
| SPACE BETWEEN TIE-BARS(MM) | 980X950 | |||
| MAX.MOLD HEIGHT(MM) | 960 | |||
| MIN.MOLD HEIGHT(MM) | 400 | |||
| EJECTOR STROKE(MM) | 280 | |||
| EJECTOR TONNAGE(KN) | 210 | |||
| OTHERS | ||||
| MAX.PUMP PRESSURE（Mpa） | 16 | |||
| SERVO MOTOR POWER(KW) | 37+30 | |||
| HEATER POWER(KW) | 54.5 | |||
| HEATING SECTION(part) | 4+1 | |||
| OILTANK CUBAGE(L) | 1260 | |||
| MACHINE DIMENSIONS(M) | 11.42X2.4X3.14 | |||
| MACHINE WEIGHT(T) | 40.2 | |||
Please wait while your account is being registered at Tradewheel.com 
Join World's Fastest Growing B2B Network
Browse Through Millions of High-Quality Products. 