UHF RFID Reader (RJ45 interface) 0.6M UHF RFID Reader

Product Details

Brief introduction:

SW2905T is a high-performance UHF band ISO18000-6C (EPC C1G2) protocol electronic tag reader, independent intellectual property rights design, combined with the proprietary efficient electronic tag collision processing algorithm, while maintaining a high reading rate, to achieve fast reading and writing processing of electronic tags.

It can be widely used in various radio frequency identification (RFID) systems such as logistics, personal identification, intelligent parking lot, access control system, anti-counterfeiting system, and production process control.

Application scenarios:

♦ Card issuance management

♦ Management of access control

♦ Attendance management

Product features:

1. Design of independent intellectual property rights;

2. Fully support UHF EPC GEN2 (ISO18000-6C) protocol electronic tags;

3. Working frequency FCC 902 ~ 928MHz, CE 865 ~ 868MHz(can be adjusted by software according to the requirements of different countries or regions)

4. Work with wide-spectrum frequency hopping (FHSS) or fixed frequency transmission mode;

5. Output power: maximum 17dBm (adjustable);

6. Built-in 2DBI circular polarization ceramic antenna, card reading distance range 0~0.6m*;

7. Support active mode and command mode;

8. Support RJ45 network port;

* Effective distance depends on the protocol format, external antenna, electronic tag, and working environment.