Quantity | 10 - 15 |
Price | 25 |
MOQ | 1 pc |
Port | Shanghai China |
Packaging | polybay |
Lead Time | 15days-25days |
Original | Metallic silver |
Product name: titanium shaped parts, titanium alloy shaped parts, titanium workpiece
State: hot forging, machining
Gauge: Outer diameter (100 ~ 800mm) Inner diameter (40~100mm) x height according to drawings/customer requirements processing
State: hot forging, machining
Brand :TA1, TA2, TA7, TA9, TA10, TC4, TC11 Nickel Ni, Zirconium Zr
Implementation standards :GB/T16598, ASTM B381, ASM 4928
Delivery condition: Annealed condition (M) hot working condition (R) cold working condition (Y)(Annealed, ultrasonic detection)
Packing: The packing shall be made of materials in line with transportation safety, such as wooden case, cable tie, foam paper, carton and woven bag.
Surface treatment: light, chamfering
Surface mass: The surface roughness Ra value of the two end faces shall be no more than 3.2pm(subject to ultrasonic inspection requirements), the surface roughness Ra of the inner and outer surfaces shall be no more than 12.5um(Ra shall be no more than 3.2um when ultrasonic inspection is required for the outer circumferential surface), and the chamfer radius shall be 5~15mm.
Titanium workpiece surface should not have cracks, folding, heavy skin and other visible defects. Local defects on the surface shall be allowed to be removed by grinding. The depth of cleaning shall not exceed the dimensional tolerance of the surface and the minimum allowable size shall be guaranteed. The ratio of cleaning depth to width should be no more than 1:6 on both ends, and no more than 1:10 on the inner and outer sides. External side grinding should be axial.
Surface finish: Clean, dust-free, better acid life.
Test: mechanical property, chemical composition test, ultrasonic test.
No.47 Qianjia ,Yaoguan Town,Wujin,Changzhou,Jiangsu .China.